Crestron Residential Lighting Design Guide | GreenLight Options–CAEN Enclosures |
Universal Mounting Plates
Crestron Universal Mounting Plates (CAEN-UMP Series) are a complete line of accessory plates, which allow mounting of non-Crestron equipment to any Crestron Automation Enclosure (CAEN Series). Third-party products such as phone and alarm systems can be mounted to these plates. The advantage to using the CAEN-UMP is that a variety of sizes are available and each plate occupies the same area as one, two or four Crestron lighting modules (CLX-series).
The size corresponds to the number of module spaces and their arrangement within the enclosure. For example, CAEN-UMP2X2 occupies four module positions and CAEN-UMP1x1 occupies one module position. The others (CAEN-UMP2X1 and 1X2) occupy two module positions. Refer to the illustration for an example of plate location and orientation within a double-wide enclosure. The table below lists the dimensions and weight for each CAEN-UMP model. The CAEN-UMP must be mounted in accordance with all national and local codes.
Use the four supplied (8x1/4”) screws to attach a CAEN-UMP to an enclosure. Crestron recommends that the keyholes on the plates be located toward the outer edge of the enclosure,as shown in the illustration. As a result, the flanges of the plates do not overlap each other when positioning any combination of
CAEN-UMP2X1s, CAEN-UMP1X1s, or lighting modules side-by-side in an enclosure.
NOTES: Adhere to Class 1 versus Class 2 wiring requirements when considering the equipment attached to the CAEN-UMP in an enclosure.
Third-party equipment attached to a CAEN-UMP within a Crestron Automated
Enclosure should not be considered part of the Crestron system.
CAEN Universal Mounting Plate
Dimensions are provided in inches, edge to edge.
Weight is provided in ounces.