DIN-8SW8
The DIN-8SW8 is an 8-channel high voltage lighting control module designed to support switching of non-dimmable lighting and fans. A single model supports both 120 and 220- 240 volt applications. Each channel handles incandescent loads up to 10 amps, fluorescent loads up to 5 amps, and also 1/2 HP motors.
Features
∙ 8 channels of power switching
∙ Supports 120 to 240 volt 50/60 Hz (Not for 277 VAC operation)
∙ Override input
∙ Cresnet® communications
∙ Setup via front panel or software
∙ Programmable functionality via DIN-AP2
DIN-4DIMFLV4
The DIN-4DIMFLV4 is a 4-channel lighting control module designed to support dimming of 4-wire 0-10 volt fluorescent dimming ballasts. A single model supports both 120 and 220-240 volt applications. Each channel handles up to 30 dimmable ballasts, and may also be used for switching of non-dimmable lighting loads up to 5 amps, as well as 1/2 HP motors.
Features
∙ 4 channels of 4-wire 0-10 volt fluorescent dimming
∙ Supports 120 to 240 Volt 50/60 Hz (Not for 277 VAC operation)
∙ Also allows switching of lighting and exhaust fans ∙ Setup via front panel or software
∙ Programmable functionality via DIN-AP2
DIN-2MC2
The DIN-2MC2 is a 2-channel motor control module designed to provide control of bidirectional motors for drapes, shades, projection screens, lifts, skylights, and gates. Each channel supports up/down or open/close control of a conventional 3-wire bidirectional type motor up to 1/2 HP at voltages up to 240 volts. Built-in timing and interlock logic make it easy to program the DIN-2MC2 for failsafe operation.
Features
∙ Dual-channel bidirectional motor control ∙ Supports 120 to 240 volt 50/60 Hz
∙ Setup via front panel or software
∙ Programmable functionality via DIN-AP2
