CLW-DIM1RF
infiNET Wall Box Dimmer
CLW-DIM4RF
infiNET Wall Box Dimmer and Keypad
CLW-DIMS1RF
infiNET Wall Box Master Dimmer
CLW DIMS4RF
infiNET Wall Box Master Dimmer and Keypad
CLW-SLVD1RF
infiNET Wall Box Slave Dimmer
CLW-SW1RF
infiNET Wall Box Switch
CLW-SWS1RF
infiNET Wall Box Master Switch
CLW-SW4RF
infiNET Wall Box Switch and Keypad
CLW-SWS4RF
infiNET Wall Box Master Switch and Keypad
CLW-SLVS1RF
infiNET Wall Box Slave Switch
CLF-DIMRFB
infiNET Lamp Dimmer
1000-watt wall mount dimmer
1000-watt wall mount dimmer and programmable keypad
1000-Watt wall mount dimmer
1000-watt wall mount dimmer and programmable keypad
1000-watt wall mount slave dimmer
1000-watt wall mount switch
1000-watt wall mount switch
1000-watt wall mount switch and programmable keypad
1000-watt wall mount switch and programmable keypad
1000-watt wall mount slave switch
500 watts V/A Dimmer
The single large rocker button provides access to three user presets. With each selection, the lighting levels fade naturally between each preset level. Pressing and holding the rocker button up or down allows manual adjustment of the lighting level.
All four pushbuttons are software programmable for any Crestron system function, enabling control over additional lighting circuits, fans, drapes, audio levels, etc.
Multipoint dimming is enabled using one CLW-DIMS1RF master dimmer along with one or more CLW-SLVD1RF slave dimmers. Multipoint dimming is similar to conventional 3-way or 4-way switching, allowing dimming control of a single load from multiple locations in the room.
Multi-point dimming is enabled using one CLW-DIMS4RF master dimmer along with one or more CLW-SLVD1RF slave dimmers. Multipoint dimming is similar to conventional 3-way or 4-way switching, allowing dimming control of a single load from multiple locations in the room. All four pushbuttons are software programmable for any Crestron system function, enabling control over additional lighting circuits, fans, drapes, audio levels, etc.
Slave dimmer designed for use with the CLW-DIMS1RF and CLW-DIMS4RF infiNET master dimmers.
The single large rocker button provides simple on/off operation to control a range of lighting or fan loads. An adjustable turn-off delay allows the user time to exit the room before the lights shut off.
Multi-point switching is enabled using one CLW-SWS1RF master switch along with one or more CLW-SLVS1RF slave switches. Multipoint switching is similar to conventional 3-way or 4-way switching, allowing control of a single load from multiple locations in the room.
An adjustable turn-off delay allows the user time to exit the room before the lights shut off. All four pushbuttons are software programmable for any Crestron system function, enabling control of additional lighting circuits, fans, drapes, audio levels, etc.
All four pushbuttons are software programmable for any Crestron system function, enabling control of additional lighting circuits, fans, drapes, audio levels, etc. Multi- point switching is enabled using one CLW-SWS4RF master switch along with one or more CLW-SLVS1RF slave switches. Multipoint switching is similar to conventional 3-way or 4-way switching, allowing control of a single load from multiple locations in the room.
Slave switch designed for use with the CLW-SWS1RF and CLW-SWS4RF infiNET master dimmers.
Freestanding dimmer module designed to sit on the floor to provide dimming control of a conventional floor lamp or table lamp. It enables local dimming control via a built-in footswitch, and remote control via infiNET.
