Sanyo vcc-zm300p instruction manual Example of setting the mask in the center weighting position

Page 28

VIEW SETTING

Example of setting the mask in the center weighting position.

English

61

BLC WINDOW WEIGHTING

TOP	0
BOTTOM	0
LEFT	0
RIGHT	0
CENTER(FIX)	7
PRESET	OFF
MENU	BACK

2

BLC WINDOW WEIGHTING

TOP	0
BOTTOM	0
LEFT	0
RIGHT	0
CENTER(FIX)	7
PRESET	OFF
MENU	BACK

3BLC WINDOW WEIGHTING

TOP	0
BOTTOM	0
LEFT	0
RIGHT	0
CENTER(FIX)	7
PRESET	OFF
MENU	BACK

4BLC WINDOW WEIGHTING

TOP	0
BOTTOM	0
LEFT	0
RIGHT	0
CENTER(FIX)	7
PRESET	OFF
MENU	BACK

1 TOP: Weighting is at top.

2 BOTTOM: Weighting is at bottom.

3 LEFT: Weighting is at left.

4 RIGHT: Weighting is at right.

5 CENT (FIX): Center weighting is fixed by the number 7.

5BLC WINDOWWEIGHTING

TOP	0
BOTTOM	0
LEFT	0
RIGHT	0
CENTER(FIX)	7
PRESET	OFF
MENU	BACK

6Use the cursor button (j or l) to select a zone, then use the cursor button (d or c) to adjust weighting.

Each setting will change as shown in the illustration.

The area from each of the zones 0 – 7, except CENTER, can be adjusted.

☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.

27

Image 28

Contents VCC-ZM300P Propos de ce manuelContents Main Features AccessoriesPrecautions Parts Names and Functions Parts Names and Functions Power supply choices ConnectionsAC 24 V connection DC 12 V connectionConnections Coaxial cable type and maximum lengthSetting to ON, then press the SET button DISPLAYING/CLOSING the Menu ScreenSub-menu screen Cursor button SET buttonMenu Item Flow and Menu Operation Language screen will appear Language SettingInterface language becomes French Camera ID Setting Camera ID setting Example Setting the Camera ID to CAMID CAM 1 ???????????? Camera ID screenCamera ID Setting Sync Setting SyncPower source synchronization L-L setting Privacy Mask Setting Privacy Mask Mask settingUse the cursor button j or l to select SET for SET buttonPrivacy Mask Setting Privacy Mask About the Position screenPassword setting Password screen will appear¤¤¤ To move the cursor to the next * digitPassword Lock cancellation Password changesFor use when Password Lock is on Password NEW Password screen will appearFocus setting Lens Setting LensSetting the manual focus Manu Setting the autofocus Auto Lens Setting LensHigh High sensitivity focusing LOW Low sensitivity focusing Button Zoom setting Zoom Setting screen will appearEL Zoom Electronic zoom magnification setting Available settings OFF, x2, x4, x8, x16 16 powerIris Auto item Sense UP activated Mirror SettingOFF Normal image View Setting Item Flow About creating image setting files in View Setting View Setting Item FlowFunction is set Iris setting View SettingAutoiris setting Auto View Setting BLC Setting screen will appearBLC Setting Size screen will appear BLC Setting Position screen will appearBLC Window Weighting screen will appear Example of setting the mask in the center weighting position Use the cursor button j l d c to move the cursor to Then press the SET buttonSense UP setting Level setting Available settings OFF, x2, x4, x8, x16Iris Setting screen will appear Manual iris settingSets electronic iris ON/OFF, lens aperture and iris level White Balance adjustment View Setting 1 screen will appearAvailable methods ATW Auto trace white balance AWC One-push automatic white balanceWhite balance additional settings ATW setting White balance additional settings MWB settingMWB Setting screen will appear Use the same steps to place addition masks as needed White balance additional settings AWC setting Fast shutter speed Short mode setting Electronic Shutter settingAvailable settings 50, 120, 250, 500, 1000, 2000, 4000 Slow shutter speed Long mode setting Iris Auto item Sense UP activated or Manu item El onMotion detector setting Motion Setting screen will appear and SET for Size willSelect ON. Then press the SET button BlinkingV1, H1 V2, H2V1, H2 V2, H1Finishing motion pattern setting Motion Masking settingPattern Sensitivity setting When necessary, adjust the following settingsDetected motion confirmation mode Demo Sensitivity screen will appearInterval setting This item is set in the Motion Setting screenAlarm Sign setting Profile compensation setting Aperture Vertical directionsSet the horizontal profile compensation Set the vertical profile compensationSets AGC to on or OFF and adjusts the gain Automatic gain control AGC settingGain Setting screen will appear, and 0dB will be blinking Gamma correction setting Option Setting Control settingRS-485 Setting screen will appear Available settings 19200, 9600, 4800Alarm setting Alarm input setting Alarm Option SettingAddress setting Motion sensor input setting Motion Alarm duration setting DurationOFF Does not output a motion sensor alarm Set the duration for the following alarm input receptionAlarm output setting Alarm OUT Option Setting Menu Flow SeeMenu Flow Specifications Electronic zoomSpecifications Dimensions