Sanyo vcc-zm300p Lens Setting Lens, Focus setting, Setting the manual focus Manu

Page 18

English

LENS SETTING (LENS)

This item allows adjustment of focus (for manual focus or autofocus) and adjustment of zoom when needed.

FOCUS setting

☞Setting the manual focus (MANU)

Sets a limit for near distance focusing and sets focus speed for manual focus.

1	MAIN MENU		2
	LANGUAGE	SET	‚
	CAMERA ID	OFF
	SYNC	INT
	PRIVACY MASK	SET	‚
	LENS	SET	‚

FOCUS SETTING

LIMIT	NEAR	1M
SPEED		2

3	FOCUS SETTING		4
	LIMIT NEAR	3M
	SPEED	2

FOCUS SETTING

LIMIT	NEAR	3M
SPEED		3

	LENS		PRESET	OFF	PRESET	OFF
FOCUS	MANU	‚	MENU	BACK	MENU	BACK
FOCUS	MANU	‚
ZOOM	SET	‚

PRESET	OFF
MENU	BACK

1Use the cursor button (j or l) to select SET for LENS, then press the SET button.

The LENS screen will appear.

2Use the cursor button (d or c) to select MANU, then press the SET button.

The FOCUS SETTING screen will appear.

3LIMIT NEAR focus distance setting

Use the cursor button (j or l) to move the cursor to LIMIT NEAR, then use the cursor button (d or c) to change the distance value. (Ex: 3M)

Available settings: 1M (meter), 3M, 5M, 10C (centimeters), 30C, 50C

Note: Focusing becomes difficult when near distance limit is set to less than “1M”.

4SPEED of focus setting

Use the cursor button (j or l) to move the cursor to SPEED, then use the cursor button (d or c) to select the focus adjustment speed value. (Ex: 3)

Available settings: 1, 2, 3, 4 (Quickest speed)

☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.

17

Image 18

Contents VCC-ZM300P Propos de ce manuelContents Main Features AccessoriesPrecautions Parts Names and Functions Parts Names and Functions AC 24 V connection Power supply choicesConnections DC 12 V connectionConnections Coaxial cable type and maximum lengthSub-menu screen Setting to ON, then press the SET buttonDISPLAYING/CLOSING the Menu Screen Cursor button SET buttonMenu Item Flow and Menu Operation Language Setting Language screen will appearInterface language becomes French ID CAM 1 ???????????? Camera ID SettingCamera ID setting Example Setting the Camera ID to CAM Camera ID screenSync Setting Sync Camera ID SettingPower source synchronization L-L setting Use the cursor button j or l to select SET for Privacy Mask Setting Privacy MaskMask setting SET buttonPrivacy Mask Setting Privacy Mask About the Position screen¤¤¤ Password settingPassword screen will appear To move the cursor to the next * digitFor use when Password Lock is on Password Lock cancellationPassword changes Password NEW Password screen will appearLens Setting Lens Focus settingSetting the manual focus Manu Lens Setting Lens Setting the autofocus AutoHigh High sensitivity focusing LOW Low sensitivity focusing Button EL Zoom Electronic zoom magnification setting Zoom settingZoom Setting screen will appear Available settings OFF, x2, x4, x8, x16 16 powerMirror Setting Iris Auto item Sense UP activatedOFF Normal image View Setting Item Flow View Setting Item Flow About creating image setting files in View SettingFunction is set View Setting Iris settingAutoiris setting Auto View Setting BLC Setting screen will appearBLC Setting Position screen will appear BLC Setting Size screen will appearBLC Window Weighting screen will appear Example of setting the mask in the center weighting position Use the cursor button j l d c to move the cursor to Then press the SET buttonSense UP setting Level setting Available settings OFF, x2, x4, x8, x16Manual iris setting Iris Setting screen will appearSets electronic iris ON/OFF, lens aperture and iris level Available methods ATW Auto trace white balance White Balance adjustmentView Setting 1 screen will appear AWC One-push automatic white balanceWhite balance additional settings MWB setting White balance additional settings ATW settingMWB Setting screen will appear Use the same steps to place addition masks as needed White balance additional settings AWC setting Electronic Shutter setting Fast shutter speed Short mode settingAvailable settings 50, 120, 250, 500, 1000, 2000, 4000 Slow shutter speed Long mode setting Iris Auto item Sense UP activated or Manu item El onSelect ON. Then press the SET button Motion detector settingMotion Setting screen will appear and SET for Size will BlinkingV1, H2 V1, H1V2, H2 V2, H1Motion Masking setting Finishing motion pattern settingPattern Detected motion confirmation mode Demo Sensitivity settingWhen necessary, adjust the following settings Sensitivity screen will appearInterval setting This item is set in the Motion Setting screenAlarm Sign setting Set the horizontal profile compensation Profile compensation setting ApertureVertical directions Set the vertical profile compensationAutomatic gain control AGC setting Sets AGC to on or OFF and adjusts the gainGain Setting screen will appear, and 0dB will be blinking Gamma correction setting RS-485 Setting screen will appear Option SettingControl setting Available settings 19200, 9600, 4800Option Setting Alarm setting Alarm input setting AlarmAddress setting OFF Does not output a motion sensor alarm Motion sensor input setting MotionAlarm duration setting Duration Set the duration for the following alarm input receptionAlarm output setting Alarm OUT Option Setting Menu Flow SeeMenu Flow Specifications Electronic zoomSpecifications Dimensions