Sanyo vcc-zm300p instruction manual Parts Names and Functions

Page 5

PARTS NAMES AND FUNCTIONS

Control

terminals3

SET

4

4Menu setting button (SET) (See p8)

Connect the camera to the monitor, then press the SET button for about 3 seconds to display the on-screen menu.

5RS-485 control push-lock terminals (RS485, A, B, G)

Use a cable thicker than AWG22.

2

1

ZOOM	COM IN
FOCUS	ALARM OUT

VIDEO OUT

POWER

AC24V

RS485

5

A B G

GND

A: Twisted-pair cable terminal	G: Ground terminal
B: Twisted-pair cable terminal

6

DC12V					CLASS 2 WIRING

1 Video output connector (VIDEO OUT: BNC type)

Connect this connector to a device such as a time lapse VCR or monitor with a VIDEO IN connector.

2Power indicator (POWER)

Comes on when the power to the camera is on.

Note: After connecting the power supply the POWER indicator will blink for 5 seconds. During this time no adjustments using the menus or any other operation are possible.

3 Cursor button (See p8)

j: Press this button to move the cursor up.

c: Press this button to move the cursor to the right, or to turn the settings ON/OFF etc.

d: Press this button to move the cursor to the left, or to turn the settings ON/OFF etc.

l: Press this button to move the cursor down.

6 24 V AC or 12 V DC input terminals (AC 24 V, DC 12 V,

GND)

Lens cap

The cap is installed to protect the lens section. Remove the cap when using the camera.

English

4

Image 5

Contents Propos de ce manuel VCC-ZM300PContents Accessories Main FeaturesPrecautions Parts Names and Functions Parts Names and Functions Connections Power supply choicesAC 24 V connection DC 12 V connectionCoaxial cable type and maximum length ConnectionsDISPLAYING/CLOSING the Menu Screen Setting to ON, then press the SET buttonSub-menu screen Cursor button SET buttonMenu Item Flow and Menu Operation Interface language becomes French Language SettingLanguage screen will appear Camera ID setting Example Setting the Camera ID to CAM Camera ID SettingID CAM 1 ???????????? Camera ID screenPower source synchronization L-L setting Sync Setting SyncCamera ID Setting Mask setting Privacy Mask Setting Privacy MaskUse the cursor button j or l to select SET for SET buttonAbout the Position screen Privacy Mask Setting Privacy MaskPassword screen will appear Password setting¤¤¤ To move the cursor to the next * digitPassword changes Password Lock cancellationFor use when Password Lock is on Password NEW Password screen will appearSetting the manual focus Manu Lens Setting LensFocus setting High High sensitivity focusing LOW Low sensitivity focusing Lens Setting LensSetting the autofocus Auto Button Zoom Setting screen will appear Zoom settingEL Zoom Electronic zoom magnification setting Available settings OFF, x2, x4, x8, x16 16 powerOFF Normal image Mirror SettingIris Auto item Sense UP activated View Setting Item Flow Function is set View Setting Item FlowAbout creating image setting files in View Setting Autoiris setting Auto View SettingIris setting BLC Setting screen will appear View SettingBLC Window Weighting screen will appear BLC Setting Position screen will appearBLC Setting Size screen will appear Example of setting the mask in the center weighting position Then press the SET button Use the cursor button j l d c to move the cursor toAvailable settings OFF, x2, x4, x8, x16 Sense UP setting Level settingSets electronic iris ON/OFF, lens aperture and iris level Manual iris settingIris Setting screen will appear View Setting 1 screen will appear White Balance adjustmentAvailable methods ATW Auto trace white balance AWC One-push automatic white balanceMWB Setting screen will appear White balance additional settings MWB settingWhite balance additional settings ATW setting Use the same steps to place addition masks as needed White balance additional settings AWC setting Available settings 50, 120, 250, 500, 1000, 2000, 4000 Electronic Shutter settingFast shutter speed Short mode setting Iris Auto item Sense UP activated or Manu item El on Slow shutter speed Long mode settingMotion Setting screen will appear and SET for Size will Motion detector settingSelect ON. Then press the SET button BlinkingV2, H2 V1, H1V1, H2 V2, H1Pattern Motion Masking settingFinishing motion pattern setting When necessary, adjust the following settings Sensitivity settingDetected motion confirmation mode Demo Sensitivity screen will appearThis item is set in the Motion Setting screen Interval settingAlarm Sign setting Vertical directions Profile compensation setting ApertureSet the horizontal profile compensation Set the vertical profile compensationGain Setting screen will appear, and 0dB will be blinking Automatic gain control AGC settingSets AGC to on or OFF and adjusts the gain Gamma correction setting Control setting Option SettingRS-485 Setting screen will appear Available settings 19200, 9600, 4800Address setting Option SettingAlarm setting Alarm input setting Alarm Alarm duration setting Duration Motion sensor input setting MotionOFF Does not output a motion sensor alarm Set the duration for the following alarm input receptionAlarm output setting Alarm OUT Option Setting See Menu FlowMenu Flow Electronic zoom SpecificationsDimensions Specifications