Sanyo vcc-zm300p instruction manual Use the same steps to place addition masks as needed

Page 34

VIEW SETTING

English

3

ATW MASKING

CONTINUE (ñ)

ATW MASKING

CONTINUE (ñ)

4	ATW SETTING		5
	MASKING	ON	‚
	SMART ATW	OFF
	PRESET	OFF
	MENU	BACK

ATW SETTING

MASKING	ON	‚
SMART ATW	ON
PRESET	OFF
MENU	BACK

3Use the cursor button (j l d c) to move the mask pattern over the bright light source, then press the SET button.

Use the same steps to place addition masks as needed.

Note: Initial settings place no masks on the screen. To cancel the placement of masks, press the SET button again.

4Use the cursor button (j or l) to move a mask pattern to the bottom area of the screen and continue holding the cursor button straight down for 3 seconds.

The PRESET and MENU items will appear on the screen. Use the cursor button (j or l) to select BACK, then press the SET button. The ATW SETTING screen will reappear.

☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.

☞SMART ATW setting

If saturation is high or a scene is bright, the most suitable colors may not be obtained. In this case, set the SMART ATW to ON.

5Use the cursor button (j or l) to move the cursor to SMART ATW, then use the cursor button (d or c) to set

ON.

☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.

33

Image 34

Contents VCC-ZM300P Propos de ce manuelContents Main Features AccessoriesPrecautions Parts Names and Functions Parts Names and Functions AC 24 V connection Power supply choicesConnections DC 12 V connectionConnections Coaxial cable type and maximum lengthSub-menu screen Setting to ON, then press the SET buttonDISPLAYING/CLOSING the Menu Screen Cursor button SET buttonMenu Item Flow and Menu Operation Language screen will appear Language SettingInterface language becomes French ID CAM 1 ???????????? Camera ID SettingCamera ID setting Example Setting the Camera ID to CAM Camera ID screenCamera ID Setting Sync Setting SyncPower source synchronization L-L setting Use the cursor button j or l to select SET for Privacy Mask Setting Privacy MaskMask setting SET buttonPrivacy Mask Setting Privacy Mask About the Position screen¤¤¤ Password settingPassword screen will appear To move the cursor to the next * digitFor use when Password Lock is on Password Lock cancellationPassword changes Password NEW Password screen will appearFocus setting Lens Setting LensSetting the manual focus Manu Setting the autofocus Auto Lens Setting LensHigh High sensitivity focusing LOW Low sensitivity focusing Button EL Zoom Electronic zoom magnification setting Zoom settingZoom Setting screen will appear Available settings OFF, x2, x4, x8, x16 16 powerIris Auto item Sense UP activated Mirror SettingOFF Normal image View Setting Item Flow About creating image setting files in View Setting View Setting Item FlowFunction is set Iris setting View SettingAutoiris setting Auto View Setting BLC Setting screen will appearBLC Setting Size screen will appear BLC Setting Position screen will appearBLC Window Weighting screen will appear Example of setting the mask in the center weighting position Use the cursor button j l d c to move the cursor to Then press the SET buttonSense UP setting Level setting Available settings OFF, x2, x4, x8, x16Iris Setting screen will appear Manual iris settingSets electronic iris ON/OFF, lens aperture and iris level Available methods ATW Auto trace white balance White Balance adjustmentView Setting 1 screen will appear AWC One-push automatic white balanceWhite balance additional settings ATW setting White balance additional settings MWB settingMWB Setting screen will appear Use the same steps to place addition masks as needed White balance additional settings AWC setting Fast shutter speed Short mode setting Electronic Shutter settingAvailable settings 50, 120, 250, 500, 1000, 2000, 4000 Slow shutter speed Long mode setting Iris Auto item Sense UP activated or Manu item El onSelect ON. Then press the SET button Motion detector settingMotion Setting screen will appear and SET for Size will BlinkingV1, H2 V1, H1V2, H2 V2, H1Finishing motion pattern setting Motion Masking settingPattern Detected motion confirmation mode Demo Sensitivity settingWhen necessary, adjust the following settings Sensitivity screen will appearInterval setting This item is set in the Motion Setting screenAlarm Sign setting Set the horizontal profile compensation Profile compensation setting ApertureVertical directions Set the vertical profile compensationSets AGC to on or OFF and adjusts the gain Automatic gain control AGC settingGain Setting screen will appear, and 0dB will be blinking Gamma correction setting RS-485 Setting screen will appear Option SettingControl setting Available settings 19200, 9600, 4800Alarm setting Alarm input setting Alarm Option SettingAddress setting OFF Does not output a motion sensor alarm Motion sensor input setting MotionAlarm duration setting Duration Set the duration for the following alarm input receptionAlarm output setting Alarm OUT Option Setting Menu Flow SeeMenu Flow Specifications Electronic zoomSpecifications Dimensions