Sanyo vcc-zm300p Motion Masking setting, Pattern, Finishing motion pattern setting

Page 40

VIEW SETTING

MOTION MASKING setting

Masking target objects that are not desired for detection (swaying trees, flickers of light , etc.) will prevent unwanted alarms from being generated. This is done in the MOTION SETTING screen.

English

1	MOTION SETTING		2
1	MOTION SETTING		2					MOTION	MASKING
	SIZE	SET	‚
	MASKING	ON	‚
	SENSITIVITY	SET	‚
	ZOOM	OFF
	INTERVAL	5S
	ALARM SIGN	OFF
	PRESET	OFF						CONTINUE (ñ)
	PRESET	OFF
	MENU	BACK

MOTION MASKING

CONTINUE (ñ)

1

2

Use the cursor button (j or l) to move the cursor to MASKING, and then use the cursor button (d or c) to select ON. Then press the SET button.

The MOTION MASKING screen will appear, and the mask pattern will be blinking in the upper left corner of the screen.

Use the cursor button (j l d c) to move the mask pattern to the target object that is not to be detected, then press the SET button.

Repeat these steps to set mask patterns in other locations. Note: To clear a mask pattern, press the SET button again on

the pattern.

3Finishing motion pattern setting

Use the cursor button (j or l) to move a mask pattern to the bottom area of the screen and continue holding it for 3 seconds. The PRESET and MENU items will appear on the screen.

☞To close the menu screen or return to the previous screen, select BACK or END for MENU and press the SET button.

39

Image 40

Contents VCC-ZM300P Propos de ce manuelContents Main Features AccessoriesPrecautions Parts Names and Functions Parts Names and Functions Power supply choices ConnectionsAC 24 V connection DC 12 V connectionConnections Coaxial cable type and maximum lengthSetting to ON, then press the SET button DISPLAYING/CLOSING the Menu ScreenSub-menu screen Cursor button SET buttonMenu Item Flow and Menu Operation Language screen will appear Language SettingInterface language becomes French Camera ID Setting Camera ID setting Example Setting the Camera ID to CAMID CAM 1 ???????????? Camera ID screenCamera ID Setting Sync Setting SyncPower source synchronization L-L setting Privacy Mask Setting Privacy Mask Mask settingUse the cursor button j or l to select SET for SET buttonPrivacy Mask Setting Privacy Mask About the Position screenPassword setting Password screen will appear¤¤¤ To move the cursor to the next * digitPassword Lock cancellation Password changesFor use when Password Lock is on Password NEW Password screen will appearFocus setting Lens Setting LensSetting the manual focus Manu Setting the autofocus Auto Lens Setting LensHigh High sensitivity focusing LOW Low sensitivity focusing Button Zoom setting Zoom Setting screen will appearEL Zoom Electronic zoom magnification setting Available settings OFF, x2, x4, x8, x16 16 powerIris Auto item Sense UP activated Mirror SettingOFF Normal image View Setting Item Flow About creating image setting files in View Setting View Setting Item FlowFunction is set Iris setting View SettingAutoiris setting Auto View Setting BLC Setting screen will appearBLC Setting Size screen will appear BLC Setting Position screen will appearBLC Window Weighting screen will appear Example of setting the mask in the center weighting position Use the cursor button j l d c to move the cursor to Then press the SET buttonSense UP setting Level setting Available settings OFF, x2, x4, x8, x16Iris Setting screen will appear Manual iris settingSets electronic iris ON/OFF, lens aperture and iris level White Balance adjustment View Setting 1 screen will appearAvailable methods ATW Auto trace white balance AWC One-push automatic white balanceWhite balance additional settings ATW setting White balance additional settings MWB settingMWB Setting screen will appear Use the same steps to place addition masks as needed White balance additional settings AWC setting Fast shutter speed Short mode setting Electronic Shutter settingAvailable settings 50, 120, 250, 500, 1000, 2000, 4000 Slow shutter speed Long mode setting Iris Auto item Sense UP activated or Manu item El onMotion detector setting Motion Setting screen will appear and SET for Size willSelect ON. Then press the SET button BlinkingV1, H1 V2, H2V1, H2 V2, H1Finishing motion pattern setting Motion Masking settingPattern Sensitivity setting When necessary, adjust the following settingsDetected motion confirmation mode Demo Sensitivity screen will appearInterval setting This item is set in the Motion Setting screenAlarm Sign setting Profile compensation setting Aperture Vertical directionsSet the horizontal profile compensation Set the vertical profile compensationSets AGC to on or OFF and adjusts the gain Automatic gain control AGC settingGain Setting screen will appear, and 0dB will be blinking Gamma correction setting Option Setting Control settingRS-485 Setting screen will appear Available settings 19200, 9600, 4800Alarm setting Alarm input setting Alarm Option SettingAddress setting Motion sensor input setting Motion Alarm duration setting DurationOFF Does not output a motion sensor alarm Set the duration for the following alarm input receptionAlarm output setting Alarm OUT Option Setting Menu Flow SeeMenu Flow Specifications Electronic zoomSpecifications Dimensions