Using the Remote Control Unit (continued)
Mounting the Remote
Control Unit
5/32 x 5/8 “ (4 x 16 mm) (supplied)
Remote control unit holder
Press
Hook
When attaching to wall 1) Confirm the indoor unit beeps when the ON/OFF button is pressed at the wall location where the remote control unit is to be attached, then attach the holder to the wall.
2) When taking out the remote control unit, pull it from the holder.
When using the remote control unit
•
•
Point the transmitter on the remote control unit at the sensor on the indoor unit when operating the remote control unit and the air conditioner. Do not place objects which may block the transmitted signals between the receiver and the remote control unit.
5/32 x 5/8 “ (4 x 16 mm) (supplied)
Holder
Remote control unit holder
Securing the remote control unit to prevent theft
1)Attach the holder to the wall with one screw in the upper hole only.
2)Remove the cover from the remote control unit, and then remove the batteries. Next, place the remote control unit in the holder.
3)Secure both the remote control unit and the holder to the wall with another screw through the lower hole.
4)Put the batteries back in the remote control unit, and then replace the cover.
12 |