Remote Control Unit (Display)
Displayed when main unit sensor is in use
“ROOMTEMP” is displayed when the temperature setting has not been made.
“TEMP” is displayed when setting temperature.
Displayed when transmitting data
Displayed when temperature is shown
Displayed when the temperature setting is at the upper or lower allowable limit
Displayed when setting timer
Symbols
(1)Operation mode
AUTO.......................................
COOLING.................................
HEATING .................................
FAN ..........................................
(2)Fan speed
Automatic operation ..............
HIGH ........................................
MEDIUM..................................
LOW.........................................
(3) Set temperature
60 ± 86 °F
When set to 82 °F ...........
Current temperature
indication .........................
(4)Timer
(5)NIGHT SETBACK ....................
(6)Confirmation of transmission ...........................
(7)Sweep indication....................
F
ON
OFF
1
8 |