Indoor unit
Zone 30° ``A''
for
COOLING
Adjusting the Airflow Direction
A. Horizontal
The horizontal airflow can be adjusted by moving the vertical vane to the left or right.
Left
Right
Vertical vane
B. Vertical
Confirm that the remote control unit has been turned on. Press the FLAP button to start the flap moving up and down (). If you want to stop the flap movement and to direct the air in the desired direction, press the FLAP button again. In the COOL mode, don't direct the flap down more than 30 ° (KHS, THS Types), or leave it in the vertical position (XHS Type), otherwise condensation may drip onto the floor. Zone ``A'' (KHS, THS Types) and any position other than vertical (XHS Type) are the recommended flap positions for cooling.
CAUTION Do not move the flap with your hands.
Air outlet
Up
Flap
grille
Down
INDOOR UNIT
STANDBY
Operation Flap selector
Operation without the Remote Control Unit
If you have lost the remote control unit or it is not working, follow the steps below.
1.When the air conditioner is stopped.
If you want to turn on the air conditioner, switch the operation selector to the OFF position, and then to the ON position.
NOTE The set temperature and fan speed are automatically set at the last selection before stopping.
2.When the air conditioner is running.
If you want to turn off the air conditioner, switch the operation selector to the OFF position.
21 |