Operation with the Remote
Control Unit
1. Automatic Operation
NOTE
NOTE
STEP 2
STEP 1
Check that the circuit breaker on the power panel is turned on and that the operation selector of the indoor unit is in the ON position.
When Automatic operation mode is selected and the unit is set using the steps below, the air conditioner operates automatically and brings the room to the desired temperature simply by pressing the ON/OFF operation button.
STEP 1 Press the MODE selector to .
STEP 2 | Press the ON/OFF operation button. |
To stop the air conditioner, press the ON/OFF operation button again.
·To change the temperature setting, press the temperature setting buttons and change the setting to the desired temperature.
The indicates the upper limit for the temperature setting and the
indicates the lower limit.
•The temperature setting changes by two degrees each time one of the TEMP. buttons is pressed.
•Although the fan speed is set automatically, you can change the fan speed by pressing the FAN SPEED selector button as shown below.
13 |