Sanyo TM-SH80UG Flap button, Cool mode and dry mode, when the flaps are set in a, OFF Timer

1

	Remote Control Unit (continued)
F: FILTER reset button	Use this button to reset the filter sign . The air conditioner has a timer
	for the filter and informs you when the filter needs cleaning.
G: CHECK button	This button is used only when servicing the air conditioner.
	Do not use the CHECK button for normal operation.

H: UNIT button		When more than one indoor unit is connected, this button is used to
		select a unit when adjusting the airflow direction.
		If no unit is selected, the airflow direction of all units can be adjusted
		concurrently using the FLAP button.
I: FLAP button	( )	1. Use this button to set the airflow direction to a specific angle.
		The airflow direction (				) is displayed on the remote control unit.
			Operation mode			Number of airflow direction settings
			(COOL) or		(DRY)		3
			(HEAT) or	(FAN)		5
			(AUTO)			3
			Cooling mode:
			Heating mode:			5
		• In the cool mode and dry mode, when the flaps are set in a
			downward position, condensation may form and drip around
			the vent.

•Do not move the flap with your hands.

	NOTE		This function is available only for models X and T.
(		)
			2. Use this button to make the airflow direction sweep up and down
			automatically.
			Press this button several times until the (		) symbol appears on
			the display.
			This function is available only for models X, T and K.
.	NOTE
J: TIMER SET button			Use this button while the unit is operating to switch between timer
			settings:
(OFF Timer)				:The air conditioner stops after the length of time set.
(OFF Cycle Timer)				:The air conditioner after the same set time every time.
(ON Timer)				:The air conditioner starts after the length of time set.
K: Time setting buttons				:Press this button to increase the time.

:Press this button to decrease the time.

L: SET button	Use this button to set the timer.
M: CL button	Use this button to clear the timer setting.
N: Temperature sensor of the	While the temperature sensor of the indoor unit usually detects ambient
remote controller	temperatures, it is also possible to detect temperatures around the
	remote controller. For the detail of this functionality, consult your dealer.
	(Do not use this functionality for group operation.)
O: VENTILATION button	Use this button when you installed a fan available in the market.
	Pressing this button turns on and off the fan.
	When turning off the air conditioner, the fan will be also turned off.
	While the fan is operating,	will appear in the display. If	is
	displayed when pressing the ventilation button, no fans are installed.

1 - 6 OI-432-01 - 6EG