Black & Decker BDCMTOR, BDCMTJSR instruction manual Specific Safety Rules, Symbol Signal Meaning

Page 2
WARNING:
serious injury.

SYMBOL SIGNAL MEANING

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION.

May be used in conjunction with other symbols or pictographs.

DANGER: Indicates hazardous situation which, if not avoided, will result in death or serious injury. Indicates hazardous situation which, if not avoided, could result in death or

CAUTION: Indicates a hazard­ous­ situation which, if not avoided, could result in minor or moder­ate­ injury or property damage.

WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.

WARNING: Read all safety warnings and all instructions provided with your Power Unit (BDCDMT112, BDCDMT120, or BDEDMT) before using this attachment. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Specific Safety Rules

• Hold power tool by insulated gripping surfaces, because the cutter may contact its own cord. Cutting a “live” wire may make exposed metal parts of the power tool “live” and shock the operator.

• Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by your hand or against the body leaves it unstable and may lead to loss of control.

• Keep handles dry, clean, and free from oil and grease. This will enable better control of the tool.

• Keep hands away from cutting area. Never reach under the workpiece for any reason.

Keep the router base firmly in contact with the workpiece when cutting. Hold the router only by identified gripping surfaces as identified in this manual (see Using the Router). These precautions will reduce the risk of personal injury.

Kickback is a sudden reaction to a pinched, bound or misaligned router bit, causing an uncontrolled router to lift up and out of the workpiece toward the operator.

• Keep your body positioned parallel to the direction of the cut, not behind the direction of the cut. KICKBACK could cause the router to jump opposite the direction of the cut.

• Use sharp cutters. Dull cutters may cause the router to swerve or stall under pressure.

• Never touch the bit immediately after use. It may be extremely hot.

• Be sure that the motor has stopped completely before you lay the router down. If the cutter head is still spinning when the tool is laid down, it could cause injury or damage.

• Be sure that the router bit is clear of the workpiece before starting the motor. If the bit is in contact with the workpiece when the motor starts it could make the router jump, causing damage or injury.

• Only use router bits with a shank diameter of 1/4”.

• Only use router bits rated at least equal to the maximum speed marked on the tool.

• Do not use router bits with a diameter greater than 1-3/8” (35mm). Use of larger than recommended bits can result in a hazard.

• Not intended to be used with a router table. Do not use the tool in an inverted position.

• Do not attempt to use the tool in a stationary mode.

• Make sure collet nut is securely tightened to prevent router bit from slipping during use.

WARNING: ALWAYS use safety glasses. Everyday eyeglasses are NOT safety glasses. Also use face or dust mask if drilling operation is dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CPA Z94.3),

• ANSI S12.6 (S3.19) hearing protection,

• NOSH/OSHA respiratory protection.

WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paints,

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Router attachment Thank you for choosing Black+DeckerSpecific Safety Rules Symbol Signal MeaningSymbols Functional DescriptionBattery from tool or disconnect plug from power Source Bit Installation and Removal fig. BInstalling and removing a router bit Operating Instructions OperationRemoving Bits Using the Router fig. D & EControls Troubleshooting Service Information Full Two-Year Home Use Warranty Module de toupie Page Conserver CES Directives Insertion ET Retrait D’UNE Fraise FonctionnementFonctionnement Utilisation DE LA Toupie fig. D & E Installation DES FraisesRéglage DE LA Profondeur DE Toupillage fig. C Dépannage Problème Cause possible Solution possibleAccessoires Conseils Pour Optimiser L’UTILISATIONInformation sur les réparations Aditamento de sierra de recorte Page Voltios Amperios Hertz Vatios Funcionamiento OperaciónDescripción funcional Instalación Y Extracción DE UNA Broca Para RebajadoraControles Instalación DE BrocasAdvertencia Apague la rebajadora y quite Velocidad DE Avance Y DE Corte Detección de problemasUSO DE LA Rebajadora Figuras D Y E Consejos Para UN USO ÓptimoAccesorios Reemplazo DE LAS Etiquetas DE AdvertenciaPage Esta Garantia no Aplica Cuando Solamente Para Propositos DE Mexico

BDCMTOR, BDCMTJSR specifications

The Black & Decker BDCMTJSR and BDCMTOR are part of the brand’s innovative line of cordless tools, designed to enhance user experience through convenience and versatility. These tools stand out not just for their performance but also for their user-centric features that cater to both amateurs and professionals alike.

The BDCMTJSR, a jigsaw model, is engineered for precision cutting. With its lightweight design, it allows for easy maneuverability, making it an ideal choice for intricate cuts and curved shapes. The variable speed control feature enables users to adjust the cutting speed according to the material being worked on, ensuring clean cuts with minimal effort. The BDCMTJSR also benefits from a tool-free blade change system, allowing for quick and easy blade swaps, promoting efficiency and reducing downtime.

On the other hand, the BDCMTOR is a robust oscillating multi-tool that excels in various applications ranging from sanding to cutting. Its versatility is one of its hallmark features, enabling users to handle a wide array of tasks with a single tool. The precision-engineered oscillating mechanism minimizes vibration, providing both comfort and control during operation. Similar to the jigsaw, the BDCMTOR incorporates a tool-free accessory change system, facilitating seamless transitions between different attachments.

Both models utilize Black & Decker’s 20V MAX Lithium-Ion battery platform. This technology ensures long-lasting power and compatibility across a range of tools. The batteries are designed to hold a charge for extended periods, allowing users to get more done without frequent recharges. Furthermore, the built-in LED lights on both tools enhance visibility in dimly lit workspaces, ensuring safety and precision.

Portability and ease of use are significant attributes of these tools. Their cordless nature eliminates the hassle of managing power cords, making them ideal for outdoor projects or tight spaces. For added comfort, both tools are designed with ergonomic grips, minimizing user fatigue during prolonged use.

In summary, the Black & Decker BDCMTJSR and BDCMTOR are powerful additions to any toolkit, offering essential features that emphasize usability, efficiency, and versatility. With their commitment to innovation, Black & Decker continues to provide tools that meet the evolving needs of DIY enthusiasts and professionals alike, ensuring exceptional performance in every project.
Top Page Image Contents