Black & Decker BDCMTOR, BDCMTJSR instruction manual Troubleshooting

Page 6

Feeding Speed and Rate of Cut

Variation between materials and bit configurations dictates a wide variety of feed rates. Experience is the best measure for determining feed rate. Become familiar with the sound and feel of the router by making practice cuts in scrap material.

The router bit rotates at a very high speed and may heat up if the router is moved too slowly through the wood and cause burn marks. Feeding the router too fast or trying to remove too much material in a single pass will overload the motor. Use two or more passes for extra-large cuts (over 1/8” deep), especially in hard woods.

Hints for optimum use

When working on outside edges, move the tool counterclockwise (figure E). When working on inside edges, move the tool clockwise.

• Use pilot (ball bearing) router bits for edge profile cutting.

• Use HSS (high speed steel) router bits for softwood.

• Use TCT (tungsten carbide tipped) router bits for hardwood.

• Not recommended for plunge cutting.

Troubleshooting

Problem

Possible Cause

Possible Solution

• Unit will not start.

• Attachment is not secured.

• Make certain the attachment is fully

 

 

pushed into the Power Unit.

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK+DECKER help line at 1-800-544-6986.

NOTE: Refer to Power Unit instruction manual for troubleshooting solutions regarding opera- tion of the Power Unit.

Maintenance

Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.

IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those listed in this manual) should be performed by authorized service centers or other qualified service personnel, always using identical replacement parts.

Accessories

WARNING: The use of any accessory not recommended for use with this tool could be hazardous. Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call: 1-800-544-6986.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Router attachment Thank you for choosing Black+DeckerSpecific Safety Rules Symbol Signal MeaningSymbols Functional DescriptionBattery from tool or disconnect plug from power Source Bit Installation and Removal fig. BInstalling and removing a router bit Operating Instructions OperationUsing the Router fig. D & E ControlsRemoving Bits Troubleshooting Service Information Full Two-Year Home Use Warranty Module de toupie Page Conserver CES Directives Fonctionnement FonctionnementInsertion ET Retrait D’UNE Fraise Installation DES Fraises Réglage DE LA Profondeur DE Toupillage fig. CUtilisation DE LA Toupie fig. D & E Dépannage Problème Cause possible Solution possibleAccessoires Conseils Pour Optimiser L’UTILISATIONInformation sur les réparations Aditamento de sierra de recorte Page Voltios Amperios Hertz Vatios Funcionamiento OperaciónDescripción funcional Instalación Y Extracción DE UNA Broca Para RebajadoraInstalación DE Brocas Advertencia Apague la rebajadora y quiteControles Velocidad DE Avance Y DE Corte Detección de problemasUSO DE LA Rebajadora Figuras D Y E Consejos Para UN USO ÓptimoAccesorios Reemplazo DE LAS Etiquetas DE AdvertenciaPage Esta Garantia no Aplica Cuando Solamente Para Propositos DE Mexico

BDCMTOR, BDCMTJSR specifications

The Black & Decker BDCMTJSR and BDCMTOR are part of the brand’s innovative line of cordless tools, designed to enhance user experience through convenience and versatility. These tools stand out not just for their performance but also for their user-centric features that cater to both amateurs and professionals alike.

The BDCMTJSR, a jigsaw model, is engineered for precision cutting. With its lightweight design, it allows for easy maneuverability, making it an ideal choice for intricate cuts and curved shapes. The variable speed control feature enables users to adjust the cutting speed according to the material being worked on, ensuring clean cuts with minimal effort. The BDCMTJSR also benefits from a tool-free blade change system, allowing for quick and easy blade swaps, promoting efficiency and reducing downtime.

On the other hand, the BDCMTOR is a robust oscillating multi-tool that excels in various applications ranging from sanding to cutting. Its versatility is one of its hallmark features, enabling users to handle a wide array of tasks with a single tool. The precision-engineered oscillating mechanism minimizes vibration, providing both comfort and control during operation. Similar to the jigsaw, the BDCMTOR incorporates a tool-free accessory change system, facilitating seamless transitions between different attachments.

Both models utilize Black & Decker’s 20V MAX Lithium-Ion battery platform. This technology ensures long-lasting power and compatibility across a range of tools. The batteries are designed to hold a charge for extended periods, allowing users to get more done without frequent recharges. Furthermore, the built-in LED lights on both tools enhance visibility in dimly lit workspaces, ensuring safety and precision.

Portability and ease of use are significant attributes of these tools. Their cordless nature eliminates the hassle of managing power cords, making them ideal for outdoor projects or tight spaces. For added comfort, both tools are designed with ergonomic grips, minimizing user fatigue during prolonged use.

In summary, the Black & Decker BDCMTJSR and BDCMTOR are powerful additions to any toolkit, offering essential features that emphasize usability, efficiency, and versatility. With their commitment to innovation, Black & Decker continues to provide tools that meet the evolving needs of DIY enthusiasts and professionals alike, ensuring exceptional performance in every project.
Top Page Image Contents