Operating Instructions Operation | Black & Decker BDCMTOR, BDCMTJSR

operating Instructions

WARNING: Shock hazard. Under no circumstances should this product be used near water.

WARNING: To reduce the risk of injury, turn off and remove battery from tool or disconnect plug from power source before making any adjustments or removing or installing attachments or accessories.

WARNING: Risk of lacerations or burns. Do not touch work piece or bit immediately after operating the tool. They can become very hot. Handle carefully. Always allow accessories and workpiece to cool before handling.

NOTE: Refer to Power Unit instruction manual before operating this tool for all safety warnings and details on installing and removing attachments.

operation

•To switch the tool on, press and hold the active lock-off button (3), then fully press the variable speed switch on the power unit. Once the bit begins to operate, release the active lock-off button (3).

•To switch the tool off, release the variable speed switch. NOTE: Operate the router at full speed at all times.

NOTE: This attachment only operates in the forward direction, the forward/reverse slider of the Power Unit should not be able to be switch to reverse.

installing and removing a router bit

WARNING: To reduce the risk of injury, turn off and remove battery from tool or disconnect plug from power source before making any adjustments or removing or installing attachments or changing bits. Failure to do so could result in accidental starting and possible injury.

Bit Installation and Removal (fig. B)

NOTES:

•Router is not recommended for use with raised panel bits.

•Router is not recommended for use in metal cutting applications.

•DO NOT USE ANY ROUTER BIT GREATER THAN 1-3/8” DIAMETER. Use pilot (ball bearing) router bits for edge profile cutting.

CAUTION: Router bits are sharp, use care when handling them. Installing Bits

	WARNING: Turn the router off and remove	B	Spindle lock button
battery from tool or disconnect plug from power		B
battery from tool or disconnect plug from power
source.
The router is equipped with a spindle lock feature
that makes changing bits easy.Lock the spindle
shaft by depressing the spindle lock button as
shown in figure B and use the supplied wrench to
loosen (counterclockwise) the collet nut (4).
•	Keep the spindle lock button (2) depressed and
	rotate the spindle until the spindle lock fully engages.
• Place the router upside down on a smooth, flat surface.
•	Loosen the collet nut (4) using the wrench provided.
•	Insert the shank of the router bit into the collet (4).
•	When installing router bits, be sure they are
	inserted as far as possible and then pulled out
•	about 1/16” (1.5mm).
•	Keep the spindle lock button (2) depressed and tighten the collet nut (4) clockwise (do not over-
	tighten)using the wrench provided.

NOTE: If the router base is set at its maximum depth, the collet nut cannot be tightened properly. Always insure that if the router base is adjusted to its maximum depth it must be backed off several rotations (counterclockwise) before tightening or loosening router bits. See “Setting the Router Depth” below for router base adjustment.

BDCMTOR, BDCMTJSR specifications

The Black & Decker BDCMTJSR and BDCMTOR are part of the brand’s innovative line of cordless tools, designed to enhance user experience through convenience and versatility. These tools stand out not just for their performance but also for their user-centric features that cater to both amateurs and professionals alike.

The BDCMTJSR, a jigsaw model, is engineered for precision cutting. With its lightweight design, it allows for easy maneuverability, making it an ideal choice for intricate cuts and curved shapes. The variable speed control feature enables users to adjust the cutting speed according to the material being worked on, ensuring clean cuts with minimal effort. The BDCMTJSR also benefits from a tool-free blade change system, allowing for quick and easy blade swaps, promoting efficiency and reducing downtime.

On the other hand, the BDCMTOR is a robust oscillating multi-tool that excels in various applications ranging from sanding to cutting. Its versatility is one of its hallmark features, enabling users to handle a wide array of tasks with a single tool. The precision-engineered oscillating mechanism minimizes vibration, providing both comfort and control during operation. Similar to the jigsaw, the BDCMTOR incorporates a tool-free accessory change system, facilitating seamless transitions between different attachments.

Both models utilize Black & Decker’s 20V MAX Lithium-Ion battery platform. This technology ensures long-lasting power and compatibility across a range of tools. The batteries are designed to hold a charge for extended periods, allowing users to get more done without frequent recharges. Furthermore, the built-in LED lights on both tools enhance visibility in dimly lit workspaces, ensuring safety and precision.

Portability and ease of use are significant attributes of these tools. Their cordless nature eliminates the hassle of managing power cords, making them ideal for outdoor projects or tight spaces. For added comfort, both tools are designed with ergonomic grips, minimizing user fatigue during prolonged use.

In summary, the Black & Decker BDCMTJSR and BDCMTOR are powerful additions to any toolkit, offering essential features that emphasize usability, efficiency, and versatility. With their commitment to innovation, Black & Decker continues to provide tools that meet the evolving needs of DIY enthusiasts and professionals alike, ensuring exceptional performance in every project.