Black & Decker BDCMTJSR, BDCMTOR Controls, Removing Bits, Using the Router fig. D & E

Page 5

CAUTION: Never tighten collet nut without a 1/4” shank size bit inserted into collet. To do so may break or damage collet.

Removing Bits

CAUTION: Burn hazard. Router bits get hot during use. Allow sufficient time for bit to cool before replacing.

• Keep the spindle lock button (2) depressed.

• Place the router upside down on a smooth, flat surface.

• Loosen (counterclockwise) the collet nut (4) using the wrench provided.

• Release button and remove bit.

Controls

WARNING: To reduce the risk of injury, do not overload the tool. Let it work at its own pace.

WARNING: To reduce the risk of injury, turn off and remove battery from tool or disconnect plug from power source before making any adjustments or removing or installing attachments or accessories.

SETTING THE ROUTING DEPTH (fig. C)

C

WARNING: Turn the router off and

 

remove battery from tool or disconnect plug

 

from power source.

 

1. Keep the spindle lock button (2) depressed

 

and rotate the router base (8) as shown in

 

figure C. Rotating the base clockwise will

 

increase the routing depth while rotating the

 

basecounterclockwise will decrease the depth.

 

Two complete revolutions of the base equals

 

about 2 millimeters.

 

2. After obtaining the desired routing depth,

 

release the spindle lock button (2). Continue

 

turning the base until the notch under the spindle lock button aligns with the next closest

locking slot in the depth of cut scale (6).

 

Using the Router (fig. D & E)

1. Make sure that the material to be cut is clamped down and is stable enough to support the router during operation.

2. Use both hands on the power unit to control the router, and run the router at full speed at all times. See figure D.

3. Move the router counterclockwise when cutting outside edges. Move clockwise when cutting inside edges. See figure E.

DE

Bit Rotation ( View from top of router)

Router travel should follow arrows

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Thank you for choosing Black+Decker Router attachmentSymbol Signal Meaning Specific Safety RulesFunctional Description SymbolsInstalling and removing a router bit Bit Installation and Removal fig. BBattery from tool or disconnect plug from power Source Operating Instructions OperationRemoving Bits Using the Router fig. D & EControls Troubleshooting Service Information Full Two-Year Home Use Warranty Module de toupie Page Conserver CES Directives Insertion ET Retrait D’UNE Fraise FonctionnementFonctionnement Utilisation DE LA Toupie fig. D & E Installation DES FraisesRéglage DE LA Profondeur DE Toupillage fig. C Accessoires Problème Cause possible Solution possibleDépannage Conseils Pour Optimiser L’UTILISATIONInformation sur les réparations Aditamento de sierra de recorte Page Voltios Amperios Hertz Vatios Descripción funcional OperaciónFuncionamiento Instalación Y Extracción DE UNA Broca Para RebajadoraControles Instalación DE BrocasAdvertencia Apague la rebajadora y quite USO DE LA Rebajadora Figuras D Y E Detección de problemasVelocidad DE Avance Y DE Corte Consejos Para UN USO ÓptimoReemplazo DE LAS Etiquetas DE Advertencia AccesoriosPage Esta Garantia no Aplica Cuando Solamente Para Propositos DE Mexico

BDCMTOR, BDCMTJSR specifications

The Black & Decker BDCMTJSR and BDCMTOR are part of the brand’s innovative line of cordless tools, designed to enhance user experience through convenience and versatility. These tools stand out not just for their performance but also for their user-centric features that cater to both amateurs and professionals alike.

The BDCMTJSR, a jigsaw model, is engineered for precision cutting. With its lightweight design, it allows for easy maneuverability, making it an ideal choice for intricate cuts and curved shapes. The variable speed control feature enables users to adjust the cutting speed according to the material being worked on, ensuring clean cuts with minimal effort. The BDCMTJSR also benefits from a tool-free blade change system, allowing for quick and easy blade swaps, promoting efficiency and reducing downtime.

On the other hand, the BDCMTOR is a robust oscillating multi-tool that excels in various applications ranging from sanding to cutting. Its versatility is one of its hallmark features, enabling users to handle a wide array of tasks with a single tool. The precision-engineered oscillating mechanism minimizes vibration, providing both comfort and control during operation. Similar to the jigsaw, the BDCMTOR incorporates a tool-free accessory change system, facilitating seamless transitions between different attachments.

Both models utilize Black & Decker’s 20V MAX Lithium-Ion battery platform. This technology ensures long-lasting power and compatibility across a range of tools. The batteries are designed to hold a charge for extended periods, allowing users to get more done without frequent recharges. Furthermore, the built-in LED lights on both tools enhance visibility in dimly lit workspaces, ensuring safety and precision.

Portability and ease of use are significant attributes of these tools. Their cordless nature eliminates the hassle of managing power cords, making them ideal for outdoor projects or tight spaces. For added comfort, both tools are designed with ergonomic grips, minimizing user fatigue during prolonged use.

In summary, the Black & Decker BDCMTJSR and BDCMTOR are powerful additions to any toolkit, offering essential features that emphasize usability, efficiency, and versatility. With their commitment to innovation, Black & Decker continues to provide tools that meet the evolving needs of DIY enthusiasts and professionals alike, ensuring exceptional performance in every project.
Top Page Image Contents