Cisco Systems 1700 manual Installing a Dimm, Figure C-5 Removing a Mini-Flash Module

Appendix C Installing and Upgrading Router Memory

Figure C-5 Removing a Mini-Flash Module

12614

Mini-Flash module release lever

Installing a DIMM

You can install a dual inline memory module (DIMM) to increase the amount of dynamic random-access memory (DRAM) in the router.

Take the following steps to install a DIMM on the router motherboard.

Step 1 Locate the DIMM slot on the motherboard, shown in

Figure C-2.

Step 2 Remove any existing DIMM by pulling the DIMM slot guides (shown in Figure C-6) away from the DIMM and down towards the motherboard.

Step 3 Hold the replacement DIMM with the notched edge away from you and facing the router.

Step 4 Insert the DIMM into the DIMM slot, making sure that the notches on the edge of the DIMM are inserted over the bars inside the DIMM slot, as in Figure C-6.

	Cisco 1700 Router Hardware Installation Guide
78-5405-03		C-7