Cisco Systems 1700 manual Closing the Chassis, Figure C-6 Installing a Dimm

Appendix C Installing and Upgrading Router Memory

Step 5 Firmly press the DIMM into the slot until the two DIMM slot guides on each side of the slot move up and over the end of the DIMM, as in Figure C-6. If the guides do not move up over the edge of the DIMM, move them with your hands.

Figure C-6 Installing a DIMM

DIMM module

2

Closing the Chassis

After installing memory on the motherboard, close the chassis by following these steps:

Step 1 If you disconnected the fan from the motherboard as described in the “Opening the Chassis” section, reconnect the fan cable to the connector labeled FAN on the motherboard.

Step 2 Locate the posts that protrude from the inside of the chassis cover and corresponding openings on the chassis bottom.