Delta 36-441B, 36-451X instruction manual PARTS, Service or Warranty Assistance, Accessories

Page 31

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Two Year Limited New Product Warranty

Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

31

Image 31
Contents Contractor’s Saw General Safety Rules Safety Guidelines DefinitionsImportant Safety Instructions Stay ALERT, Watch What YOU are DOING, Properly Support Long or Wide workpieces Additional Safety Rules for Contractor SAWMotor Specifications Power ConnectionsGrounding Instructions Volt Minimum Gauge Extension Cord Extension CordsFunctional Description Unpacking and CleaningForeword Unpacking and Cleaning Rear Leg Panel Assembling SAW Stand SAW AssemblyAssembling SAW to Stand Assembling Motor to Motor Mounting Plate Motor AssemblyDisconnect Machine from the Power Source Assembling Blade Tilting HandwheelAssembling Motor and Motor Mounting Plate to SAW Disconnect Machine from Power SourceTo Motor Mounting Plate Assembling Motor PULLEY, Belt Pulley GUARD, and Drive BeltIllustrates the motor cord connected to the switch assembly Connecting Motor Cord to Switch AssemblyAssembling Blade Guard Splitter Assembly Assembling and Aligning Blade Guard and Splitter AssemblyIf alignment is necessary, loosen the two screws Page Assembling Cast Iron Extension Extension and Switch AssemblyAssembling Steel Extension Wing and Switch Model 36-441B Assembling Switch to Cast Iron Extension WingOperating Controls Fastening Stand to Supporting SurfaceTilting the Blade Operation and AdjustmentsAdjusting 90 Degree and 45 Degree Positive Stops Raising and Lowering BladeChecking Blade Alignment Adjusting Blade AlignmentBlade Alignment Adjusting Blade Tilting Mechanism Backlash AdjustmentsChanging SAW Blade Miter Gage Operation and Adjustment Adjusting Table InsertCommon Sawing Operations Never USE the Fence AS a CUT-OFF Gage When CROSS-CUTTINGCROSS-CUTTING Constructing a Push Stick RippingUsing Moulding Cutterhead Accessory Moulding CutterheadUsing Dado Head Accessory Dado HeadConstructing a Featherboard Power Tool InstituteConstructing a Push Stick PushstickRepositioning Motor For Storage MaintenanceStorage Dust ChuteAccessories PARTS, Service or Warranty AssistanceCanadian PORTER-CABLE Delta Service Centers