Festool DTS 400 EQ General safety rules, Work area safety, Electrical safety, Personal safety

Page 2

General safety rules

Read and understand all in- structions. Failure to follow all instruc- tions listed below may result in electric shock, fire and/or serious personal in- jury.

SAVE THESE INSTRUCTIONS

1)Work area safety

a)Keep work area clean and well lit. Clut- tered and dark areas invite accidents.

b)Do not operate power tools in explo- sive atmospheres, such as in the pres- ence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c)Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2)Electrical safety

a)Power tool plugs must match the out- let. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of elec- tric shock.

b)Avoid body contact with earthed or grounded surfaces such as pipes, radia- tors, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c)Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d)Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

e)When operating a power tool outdoors, use an extension cord suitable for out- door use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

f)Hold power tool by insulated gripping surfaces only, when performing an op- eration where the cutting accessory may contact hidden wiring or its own cord.

Contact with a „live“ wire will make exposed metal parts of the power tool „live“ and shock the operator.

3)Personal safety

a)Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b)Use safety equipment. Always wear eye protection. Safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c)Avoid accidental starting. Ensure the switch is in the off position before plug- ging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper foot- ing and balance at all times. This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g)If devices are provided for the con- nection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards.

4)Tool use and care

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was de- signed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

2

Image 2
Contents Guide d’utilisation Manual de instruccionesElectrical safety General safety rulesWork area safety Personal safetyService Technical dataSymbols Intended useDust extraction Electrical connec- tion and operationElectronic control Inboard extractionWorking with the tool Maintenance and careAttaching sand Ing material Conditions of 1+2 Warranty Accessories, toolsWarranty Festool Limited WarrantyPage Sécurité électrique Régles de sécu Rité généralesSécurité de aire de travail Sécurité des personnesUtilisation et en- tretien des outils Entretien et réparationCaracteristiques Techniques SymboleRaccordement électri- que et mise en service Utilisation conformeDispositif d’auto-aspiration Aspiration de la PoussièreFixer l’abrasif Aspiration extérieure à l’aide d’un aspirateurTravailler avec loutil Entretien et maintenanceAccessoires et outils Garantie limitée de Festool GarantieConditions de la ga Rantie 1+2 ans Seguridad eléctrica Normas genera- les de seguridadSeguridad del es- pacio de trabajo Seguridad personalUso y cuidado de la herramienta MantenimientoUso conforme a lo Determinado Datos técnicosSímbolos Conexión eléctrica y puesta en servicioDispositivo autoaspirador Dispositivo de aspi Ración de polvoFijación del ma- terial abrasivo Dispositivo de aspiración externa, con aspiradorAccesorios, herramientas Trabajo con la lijadoraMantenimiento y Conservación Garantía limitada de Festool GarantiáCondiciones de la Ga Rantía 1 +2

DTS 400 EQ specifications

The Festool DTS 400 EQ is a leading sander renowned for its exceptional performance and versatility in woodworking and finishing tasks. Designed for professionals and enthusiasts alike, this tool excels in delivering a smooth, polished finish with minimal effort.

One of the main features of the DTS 400 EQ is its compact and ergonomic design. Weighing only 1.4 kg, it is lightweight, making it easy to maneuver during extended use. The sander is equipped with a rounded tool body and soft grip areas, ensuring user comfort while allowing for precise control over the sanding process. This unique shape facilitates work in tight corners and edges, making it an ideal choice for intricate projects.

At the heart of the DTS 400 EQ is its high-performance motor that produces a powerful yet gentle orbiting motion. This allows for efficient material removal without damaging the work surface. The tool operates at a speed range of 6,000 to 12,000 oscillations per minute, giving users flexibility to adjust the sanding power based on the task at hand.

The DTS 400 EQ features a multi-purpose sanding pad that can be easily replaced, allowing users to switch between various sanding grits with ease. Additionally, the sander utilizes a microfilter dust extraction system that ensures a clean working environment. This system captures even the finest dust particles, promoting better air quality and visibility during sanding.

Another significant aspect of the DTS 400 EQ is its versatility. It is suitable for a variety of applications, including sanding wood, lacquer, and other surfaces. The tool also boasts a range of accessories that enhance functionality, such as different sanding pads designed for specific tasks.

Durability is a hallmark of Festool products, and the DTS 400 EQ is no exception. Constructed with high-quality materials, it is built to withstand rigorous use in demanding environments. The sander is also backed by Festool's exceptional service and warranty, ensuring users receive reliable support.

In conclusion, the Festool DTS 400 EQ is an advanced sander combining comfort, efficiency, and versatility. With its outstanding features, powerful motor, extensive accessory options, and effective dust extraction system, it stands out as a top choice for professionals and DIY enthusiasts seeking superior sanding performance.