Schumacher SC-10030A owner manual Engine Starting Notes, Operating instructions

Page 9

changed. The buttons are ignored. The digital display indicates the remaining cool down time in seconds. It starts at 180 and counts down to 0. The ENGINE START LED blinks once every second. During the cool down period, no current is delivered to the battery. After 3 minutes, the ENGINE START LED will stop blinking and will light continuously, indicating that another crank cycle can be started. The digital display will change from displaying the countdown back to displaying the battery voltage. The CHARGING LED will then be lit.

ENGINE STARTING NOTES:

If the battery is disconnected during the cool down period, the charger will reset.

12.operating instructions

OVERVIEW: Using this battery charger is very simple. First, connect the battery and AC power. Then select the appropriate BATTERY TYPE and BATTERY SIZE for your battery. The charger will then do everything automatically. This section explains a few details.

12.1CHARGING: If the charger does not detect a properly connected battery, the CONNECTED LED will not light. Charging will not begin unless the

CONNECTED LED is on. When charging begins, the CHARGING LED will be lit.

12.2AUTOMATIC SHUT OFF: When the SMALL BATTERY or MEDIUM TO

LARGE BATTERY SIZE is selected, the charger is set to perform an auto- matic charge. When an automatic charge is performed, the charger stops charging automatically after the battery is charged.

12.3ABORTED CHARGE: If charging can’t be completed normally, charging will be aborted. When charging is aborted, the charger’s output is shut off and the digital display blinks on and off. In that state, the charger ignores all buttons. To reset from after an aborted charge, either disconnect the battery or unplug the charger.

12.4DESULFATION MODE: If a battery is left discharged for an extended period, it could become sulfated and not accept a normal charge. If the charger detects a sulfated battery, the charger will switch to a special mode of operation designed for such batteries. Activation of the special desulfation mode is indicated by blinking the CHARGING LED. If suc- cessful, normal charging will resume after the battery is desulfated. The

CHARGING LED will then stop blinking and light continuously. Desulfation

7

Image 9
Contents Electronic Page Important Safety Instructions Preparing to Charge Personal PrecautionsCharger Location DC Connection PrecautionsAc connections AC input rating Using engine start Assembly instructionsOperating instructions Engine Starting NotesCharger controls Completion of ChargingBattery Type Button Battery Size ButtonDigital Display Button SC-10030A Control Panel Guide Control panel guidePOWER-UP Idle Time Limit Testing SequenceTesting After Charging Tester Without Time LimitInitial Percent Calculation Using the built-in alternator testerBattery percent and charge time Alternator Testing NotesCharging tips Maintenance Instructions Problem Possible Cause Solution TroubleshootingPage Page 100 Page Page PREPARación de la carga Precauciones PersonalesPrecauciones DE LA Conexión CC Ubicación DEL CargadorSiga Estos Pasos cuando la batería esté afuera del vehículo Medida del cable segun la awg Conexiones ACUSO DEL Arranque DEL Motor Instrucciones DE EnsambladoFinalización DE LA Carga Instrucciones OperativasDigital Display Button Botón DE Visor Digital Controles DEL CargadorBattery Type Button Botón DE Tipo DE Batería Medium to Large Battery Baterías Medias a Grandes Battery Size Button Botón DE Tamaño DE LA BateríaGuia DE Control DEL Tablero DE Mandos Para Modelo SC-10030A Guia DE Control DEL Tablero DE MandosProbador Y Cargador Secuencia DE Prueba15.3 Límite DE Tiempo DE Inactividad Durante EL Encendido Probador SIN Límite DE Tiempo15.7 Cálculo DEL Porcentaje Inicial LOS LED DE Estado DEL ProbadorNotas Para Probar EL % DE LA Batería UTILIZACIÓN DEL Probador DE Alternadores IncorpoPorcentaje DE LA Batería Y Tiempo DE Carga Notas Sobre LA Prueba DEL AlternadorPage Instrucciones DE Mantenimiento Datos Útiles Sobre LA CargaProblema Causa Posible Solucion Localización y resolución de problemas