Operation with the Remote Control
Unit
1. Operation
STEP 2
STEP 3
STEP 1
STEP 4
STEP 5
NOTE
Check that the circuit breaker on the power panel is turned on.
Press the setting buttons as described below and change the settings as desired.
STEP 1 | Press the MODE selector button and select the desired mode. | ||
| For dehumidifying operation | → | |
| For cooling operation |
| → |
| For fan only operation |
| → |
|
| ||
STEP 2 | To start the air conditioner, press the ON/OFF operation button. | ||
|
| ||
STEP 3 | Press the TEMP. setting buttons to change the temperature | ||
| setting to the desired temperature. |
| |
| Adjustable temperature range: |
| |
| 30 °C max. | or | 86 °F max. |
| 16 °C min. |
| 60 °F min. |
|
| ||
STEP 4 | Set the FAN SPEED selector button to the setting you want. | ||
|
| ||
STEP 5 | Press the FLAP button and set the airflow direction as desired. | ||
| (Refer to “Adjusting the Airflow Direction” on page 20.) | ||
|
|
|
|
To stop the air conditioner, press the ON/OFF operation button again.
12 | |
|