90550370 LI3100.qxd 5/4/09 8:00 AM Page 5
FUNCTIONAL
DESCRIPTION
1)SWITCH
2)FORWARD / REVERSE / LOCK OFF SLIDER
3)LED WORK LIGHT
4)HEX SPINDLE
5)CHARGING PORT
6)CHARGING PLUG
7)CHARGER
A |
2 |
4 |
3 |
1 |
6 |
7 |
5 |
Safety Warnings and Instructions: Batteries
•Do not disassemble or open, drop (mechanical abuse), crush, bend or deform, puncture, or shred.
•Do not modify or remanufacture, attempt to insert foreign objects into the battery, immerse or expose to water or other liquids, or expose to fire, excessive heat including soldering irons, or put in microwave oven.
•Only use the battery / tool with a charging system specified by the manufacturer/supplier.
•Do not
•Dispose of used batteries promptly according to the manufacturer/supplier’s instructions.
•Improper battery use may result in a fire, explosion, or other hazard.
•Battery / tool usage by children should be supervised.
Safety Warnings and Instructions: Charging
1.This manual contains important safety and operating instructions.
2.Before using battery charger, read all instructions and cautionary warnings on battery charger and product using battery. 
CAUTION: To reduce the risk of injury, use this charger only with this product. Batteries in other products may burst causing personal injury or damage.
3.Do not expose charger to rain or snow.
4.Use of an attachment not recommended or sold by Black & Decker may result in a risk of fire, electric shock, or injury to persons.
5.To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.
6.Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
7.An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire, electric shock or electrocution.
8.Use only the supplied charger when charging your tool. The use of any other charger could damage the tool or create a hazardous condition.
9.Use only one charger when charging.
5