90550370 LI3100.qxd 5/4/09 8:00 AM Page 9
Troubleshooting
Problem | Possible Cause |
• Battery will not charge. | • Charger not plugged into |
| a working outlet. |
| • Charger not plugged into |
| screwdriver. |
Possible Solution
•Plug charger into a working outlet. Refer to “Important Charging Notes” for more details.
•Check current at receptacle by plugging in a lamp or other appliance.
•Check to see if receptacle is connected to a light switch which turns power off when you turn out the lights.
• Charger jack not fully plugged | • Check to be sure |
into tool charging socket. | charger plug is fully |
| inserted into unit tool |
| charging socket. |
For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at
ACCESSORIES
Recommended accessories for use with your tool are available from your local dealer or authorized service center. If you need assistance regarding accessories, please call:
WARNING: The use of any accessory not recommended for use with this tool could be hazardous.
THE RBRC™ SEAL The RBRC™ (Rechargeable Battery Recycling Corporation) Seal on the
by Black & Decker. In some areas, it is illegal to place spent
RBRC in cooperation with Black & Decker and other battery users, has established programs in the United States and Canada to facilitate the collection of spent
1-800-8-BATTERY.
Service Information
All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you. To find your local service location, refer to the yellow page directory under
Full Two-Year Home Use Warranty
Black & Decker (U.S.) Inc. warrants this product for two years against any defects in material or workmanship. The defective product will be replaced or repaired at no charge in either of two ways.
The first, which will result in exchanges only, is to return the product to the retailer from whom it was purchased (provided that the store is a participating retailer). Returns should be made within the time period of the retailer’s policy for exchanges (usually 30 to 90 days after the sale). Proof of purchase may be required. Please check with the retailer for their specific return policy regarding returns that are beyond the time set for exchanges.
The second option is to take or send the product (prepaid) to a Black & Decker owned or
9