Black & Decker 90544571, PD400 Safety Warnings and Instructions Charging, Wire Size AWG

Page 5

90544571 PD400 clutch sc 5/22/09 7:46 AM Page 5

SAFETY WARNINGS AND INSTRUCTIONS: CHARGING

1.This manual contains important safety and operating instructions.

2.Before using battery charger, read all instructions and cautionary warnings on battery charger and product using battery. CAUTION: To reduce the risk of injury, use charger only with this product. Batteries in other products may burst causing personal injury or damage.

3.Do not expose charger to rain or snow.

4.Use of an attachment not recommended or sold by Black & Decker may result in a risk of fire, electric shock, or injury to persons.

5.To reduce risk of damage to electric plug and cord, pull by plug rather than cord when disconnecting charger.

6.Make sure cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.

7.An extension cord should not be used unless absolutely necessary. Use of improper extension cord could result in a risk of fire, electric shock or electrocution.

a.Two-wire cords can be used with 2-wire or 3-wire extension cords. Only round jacketed extension cords should be used, and we recommend that they be listed by Underwriters Laboratories (U.L.). If the extension is to be used outside, the cord must be suitable for outdoor use. Any cord marked for outdoor use can also be used for indoor work. The letters "W" or "WA" on the cord jacket indicate that the cord is suitable for outdoor use.

b.An extension cord must have adequate wire size (AWG or American Wire Gauge) for safety, and to prevent loss of power and overheating. The smaller the gauge number of the wire, the greater the capacity of the cable; that is, 16 gauge has more capacity than 18 gauge. When using more than one extension to make up the total length, be sure each extension contains at least the minimum wire size.

Recommended Minimum Wire Size for Extension Cords Total Length of Cord

25 ft.

50 ft.

75 ft.

100 ft.

125 ft.

150 ft.

175 ft.

7.6 m

15.2 m

22.9 m

30.5 m

38.1 m

45.7 m

53.3 m

Wire Size AWG

 

 

 

 

 

18

18

16

16

14

14

12

8.Use only the supplied charger when charging your tool. The use of any other charger could damage the tool or create a hazardous condition.

9.Use only one charger when charging.

10.Do not attempt to open the charger. There are no customer serviceable parts inside. Return to any authorized Black & Decker service center.

11.DO NOT incinerate the tool or batteries even if they are severely damaged or completely worn out. The batteries can explode in a fire.

12.A small leakage of liquid from the battery cells may occur under extreme usage, charging or temperature conditions. This does not indicate a failure. However, if the outer seal is broken and this leakage gets on your skin:

a.Wash quickly with soap and water.

b.Neutralize with a mild acid such as lemon juice or vinegar.

c.If the battery liquid gets in your eyes, flush them with clean water for a minimum of 10 minutes and seek immediate medical attention. MEDICAL NOTE: The liquid is a 25-35% solution of potassium hydroxide.

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents VEA EL Español EN LA Contraportada Please Read Before Returning this Product for ANY ReasonWork area safety General Safety RulesSpecific Safety Rules Functional Description Wire Size AWG Safety Warnings and Instructions ChargingImportant Charging Notes Charging the Battery Pack Figure BEngine generator or DC power source Use only 120V AC Inserting and Removing Bits Figure C Assembly and AdjustmentPivoting the Tool Head Figures D, E Press the pivot release button 3 shown in figure DOperating Instructions Accessories MaintenanceProblem Possible Cause Possible Solution Battery RemovalRbrc Seal Service Information Full TWO-YEAR Home USE WarrantyFor Service & Sales DE Catalogue PD400 Conserver CES Directives Règles de sécurité générales90544571 PD400 clutch sc 5/22/09 746 AM Lignes Directrices EN Matière DE Sécurité Définitions Règles DE Sécurité SpécifiquesDescription Fonctionnelle Calibre de fil minimum recommandé pour les rallongesLongueur totale de la rallonge Calibre AWGRemarques Importantes SUR LE Chargement Chargement DU BLOC-PILES Figure BPivotement DE LA Tête DE L’OUTIL FIG. D, E Assemblage ET RéglageInsertion ET Retrait DES Embouts Figure C Mise EN Marche ET Arrêt FIG. G Directives D’UTILISATIONAvertissements Vissage AccessoiresPerçage Conseils Pratiques Généraux Pour LE PerçageRetrait DES Piles Problème Cause possible Solution possibleInformation SUR LES Réparations Manual DE Instrucciones DEL Destornillador Inalámbrico Conserve Estas Instrucciones Normas generales de seguridadEsto garantizará la seguridad de la herramienta eléctrica Pautas DE SEGURIDAD/DEFINICIONES Normas DE Seguridad EspecíficasInstrucciones Y Advertencias DE Seguridad Carga Descripción DE LAS FuncionesNotas Importantes Sobre LA Carga Carga DEL Paquete DE Baterías Figura BInserción Y Remoción DE Puntas Figura C Montaje Y AjusteGiro DEL Cabezal DE LA Herramienta Figuras D, E AdvertenciasInterruptor Deslizable DE AVANCE/REVERSA/DESBLOQUEO FIG. F Instrucciones DE OperaciónEncendido Y Apagado FIG. G Control DE Torsión Figura HSugerencias Generales DE Taladrado TaladradoMantenimiento AccesoriosDetección DE Problemas GUADALAJARA, JAL CULIACAN, SIN MONTERREY, N.L TORREON, CoahVERACRUZ, VER PUEBLA, PUE

PD400, 90544571 specifications

The Black & Decker 90544571, PD400 is an innovative power tool designed for both amateur and professional users who demand top-notch performance and reliability. This versatile tool stands out with its robust construction and user-friendly features, making it an indispensable part of any toolkit.

One of the key features of the PD400 is its powerful motor that delivers excellent torque and speed, enabling users to tackle a wide variety of tasks with ease. Whether you're driving screws, drilling into wood, or tackling tougher materials, this tool provides the power needed for efficient operation. The ergonomic design ensures comfort during prolonged use, reducing hand fatigue and improving overall control.

The PD400 incorporates a 20-position clutch, offering precise control over drilling depths and allowing for adjustable torque settings. This feature is particularly valuable for users who want to avoid damaging materials or overdriving screws. Additionally, the dual speed control allows users to select between high and low-speed settings, providing versatility for both delicate work and heavy-duty applications.

Another highlight of the Black & Decker 90544571 is its lightweight design, which enhances portability and ease of handling. Despite its compact size, it doesn't compromise on power, making it perfect for both home improvement tasks and professional jobsites. The built-in LED work light illuminates dark or tight spaces, ensuring visibility and precision even in less-than-ideal conditions.

The PD400 comes equipped with a keyless chuck, making bit changes quick and effortless, thus enhancing productivity. For added convenience, it includes a built-in battery indicator that allows users to keep track of charge levels, ensuring that the tool is always ready to perform when required.

In terms of safety, the PD400 features an integrated brake, which stops the drill quickly when the trigger is released. This prevents accidents and provides additional peace of mind during operation. The durable construction ensures that the tool can withstand the rigors of daily use, rendering it a long-lasting investment.

In summary, the Black & Decker 90544571, PD400 is a feature-rich, reliable power tool that offers a perfect blend of power, precision, and user convenience. Its advanced technologies and thoughtful design make it an excellent choice for DIY enthusiasts and professionals alike, providing the performance required for an array of drilling and driving tasks.
Top Page Image Contents