Black & Decker PD400, 90544571 instruction manual Operating Instructions

Page 8

90544571 PD400 clutch sc 5/22/09 7:46 AM Page 8

OPERATING INSTRUCTIONS

Prior to operation:

• Make sure your screwdriver is (fully) charged.

SWITCHING ON AND OFF (FIGURE G)

•To turn the tool ON in a forward direction, move the forward/reverse slider (2) upward.

•Squeeze the trigger switch (1) and the tool will run.

•Release pressure from the trigger and the tool will stop.

•To turn the tool ON in a reverse direction, move the forward/reverse slider (2) downward.

•Squeeze the trigger switch (1) and the tool will run.

•Release pressure from the trigger and the tool will stop.

G

2

1

•To lock the tool in the off position, move the forward/reverse slider (2) to the central position.

TORQUE CONTROL (FIGURE H)

Your screwdriver is equipped with a six position adjustable clutch collar (5). When the tool reaches the preselected torque setting the clutch slips, thus limiting how tightly a screw is driven.

•The tool’s motor will continue to run as long as the switch button is depressed.

•To set the tool’s torque, rotate the adjustable clutch collar (5) clockwise or counterclockwise as required. The larger the screw icon, the higher the torque.

•Each click in a clockwise direction (facing the spindle ) means an increase in the torque produced.

H

 

5

1

 

SCREWDRIVING

•Insert the appropriate hex shank screwdriver bit.

•Set the forward/reverse slider (2) to the desired rotation.

•Set the adjustable clutch collar (5) to position 1 and begin screwdriving (low torque).

•If the clutch ratchets too soon, adjust the collar to increase the torque as required.

DRILLING

•Insert the appropriate hex shank drill bit.

•Select the drilling mode using the adjustable clutch collar (5) to the position marked with the largest screw icon.

•Select forward rotation.

GENERAL DRILLING TIPS

•This tool is not recommended for drilling in masonry.

•Use sharp drill bits only

•Drill bits for metal can be used for drilling holes in wood. These bits must be sharp and should be pulled out frequently when drilling to clear chips from the flutes.

•Support and secure work properly, as instructed in the safety Instructions.

•Use appropriate and required safety equipment, as instructed in the safety instructions.

•Secure and maintain work area, as instructed in the safety instructions.

•Use light pressure until the hole is started enough to keep the drill bit from slipping out of it.

•Apply pressure in a straight line with the bit. Use enough pressure to keep the bit biting but not so much as to stall the motor or deflect the bit.

•Hold the tool firmly to control its twisting action.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Please Read Before Returning this Product for ANY Reason VEA EL Español EN LA ContraportadaGeneral Safety Rules Work area safetySpecific Safety Rules Functional Description Safety Warnings and Instructions Charging Wire Size AWGImportant Charging Notes Charging the Battery Pack Figure BEngine generator or DC power source Use only 120V AC Assembly and Adjustment Inserting and Removing Bits Figure CPivoting the Tool Head Figures D, E Press the pivot release button 3 shown in figure DOperating Instructions Maintenance AccessoriesProblem Possible Cause Possible Solution Battery RemovalRbrc Seal Service Information Full TWO-YEAR Home USE WarrantyFor Service & Sales DE Catalogue PD400 Règles de sécurité générales Conserver CES Directives90544571 PD400 clutch sc 5/22/09 746 AM Règles DE Sécurité Spécifiques Lignes Directrices EN Matière DE Sécurité DéfinitionsCalibre de fil minimum recommandé pour les rallonges Description FonctionnelleLongueur totale de la rallonge Calibre AWGChargement DU BLOC-PILES Figure B Remarques Importantes SUR LE ChargementPivotement DE LA Tête DE L’OUTIL FIG. D, E Assemblage ET RéglageInsertion ET Retrait DES Embouts Figure C Mise EN Marche ET Arrêt FIG. G Directives D’UTILISATIONAvertissements Accessoires VissagePerçage Conseils Pratiques Généraux Pour LE PerçageProblème Cause possible Solution possible Retrait DES PilesInformation SUR LES Réparations Manual DE Instrucciones DEL Destornillador Inalámbrico Normas generales de seguridad Conserve Estas InstruccionesEsto garantizará la seguridad de la herramienta eléctrica Normas DE Seguridad Específicas Pautas DE SEGURIDAD/DEFINICIONESDescripción DE LAS Funciones Instrucciones Y Advertencias DE Seguridad CargaCarga DEL Paquete DE Baterías Figura B Notas Importantes Sobre LA CargaMontaje Y Ajuste Inserción Y Remoción DE Puntas Figura CGiro DEL Cabezal DE LA Herramienta Figuras D, E AdvertenciasInstrucciones DE Operación Interruptor Deslizable DE AVANCE/REVERSA/DESBLOQUEO FIG. FEncendido Y Apagado FIG. G Control DE Torsión Figura HTaladrado Sugerencias Generales DE TaladradoMantenimiento AccesoriosDetección DE Problemas CULIACAN, SIN MONTERREY, N.L TORREON, Coah GUADALAJARA, JALVERACRUZ, VER PUEBLA, PUE

PD400, 90544571 specifications

The Black & Decker 90544571, PD400 is an innovative power tool designed for both amateur and professional users who demand top-notch performance and reliability. This versatile tool stands out with its robust construction and user-friendly features, making it an indispensable part of any toolkit.

One of the key features of the PD400 is its powerful motor that delivers excellent torque and speed, enabling users to tackle a wide variety of tasks with ease. Whether you're driving screws, drilling into wood, or tackling tougher materials, this tool provides the power needed for efficient operation. The ergonomic design ensures comfort during prolonged use, reducing hand fatigue and improving overall control.

The PD400 incorporates a 20-position clutch, offering precise control over drilling depths and allowing for adjustable torque settings. This feature is particularly valuable for users who want to avoid damaging materials or overdriving screws. Additionally, the dual speed control allows users to select between high and low-speed settings, providing versatility for both delicate work and heavy-duty applications.

Another highlight of the Black & Decker 90544571 is its lightweight design, which enhances portability and ease of handling. Despite its compact size, it doesn't compromise on power, making it perfect for both home improvement tasks and professional jobsites. The built-in LED work light illuminates dark or tight spaces, ensuring visibility and precision even in less-than-ideal conditions.

The PD400 comes equipped with a keyless chuck, making bit changes quick and effortless, thus enhancing productivity. For added convenience, it includes a built-in battery indicator that allows users to keep track of charge levels, ensuring that the tool is always ready to perform when required.

In terms of safety, the PD400 features an integrated brake, which stops the drill quickly when the trigger is released. This prevents accidents and provides additional peace of mind during operation. The durable construction ensures that the tool can withstand the rigors of daily use, rendering it a long-lasting investment.

In summary, the Black & Decker 90544571, PD400 is a feature-rich, reliable power tool that offers a perfect blend of power, precision, and user convenience. Its advanced technologies and thoughtful design make it an excellent choice for DIY enthusiasts and professionals alike, providing the performance required for an array of drilling and driving tasks.
Top Page Image Contents