Milwaukee 6524-21 manual Specific Safety Rules, Functional Description

SPECIFIC SAFETY RULES

1.Hold power tools by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its own cord. Contact with a "live" wire will make exposed metal parts of the tool "live" and shock the operator.

2.Keep hands away from all cutting edges and moving parts.

3.Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

4.Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free replacement.

5.WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:

•lead from lead-based paint

•crystalline silica from bricks and cement and other masonry products, and

•arsenic and chromium from chemically-treated lumber.

Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out microscopic particles.

Symbology Specifications

Double Insulated	Straight Cut
Canadian Standards	Orbital Cut
Association
Underwriters	Amperes
Laboratories, Inc.
Volts Alternating	No Load Strokes
Current	per Minute (RPM)

Catalog	Volts		Strokes	Length of
Number	AC	Amps	per Minute	Stroke
6524-21	120	7.5	0 - 3000	3/4"

FUNCTIONAL DESCRIPTION

	1.	Orbit control switch
1	2.	Handle adjustment button
10	3.	Handle
	4.	Quik-Lok®cord
	5.	Trigger
	6.	Insulating Boot
	7.	Shoe release lever
	8.	Adjustable pivot shoe
	9.	Blade
	10.	Quik-Lok®blade clamp
9
7		2
8
6	5	3

4

page 4