Makita LSSOODZ, LSSOODWA instruction manual For Charger & Battery Cartridge

Page 7

ADDITIONAL SAFETY RULES

FOR CHARGER & BATTERY CARTRIDGE

1.Do not charge Battery Cartridge when temperature is BELOW 10°C (5OoF1 or ABOVE 4OoC (104OF).

2.Do not attempt to use a step-up transformer, an engine generator or DC power receptacle.

3.Do not allow anything t o cover or clog the charger vents.

4.Always cover the battery terminals with the battery cover when the battery cartridge is not used.

5.A battery short can cause a large current flow, overheating, possible burns and even a breakdown.

(11 Do not touch the terminals with any conductive material.

(2)Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.

(3)Do not expose battery cartridge t o water or rain.

6.Do not store the tool and Battery Cartridge in locations where the tempera- ture may reach or exceed 5OoC (122OF).

7.Do not incinerate the Battery Cartridge even if it is severely damaged or is completely worn out. The battery cartridge can explode in a fire.

SAVE THESE INSTRUCTIONS.

7

Image 7

Contents Cordless Compound Miter Saw With High Capacity Battery ChargerSpecifications Save it for future reference Page Additional Safety Rules Important Safety Instructions For Charger & Battery Cartridge Charging Installing or removing battery cartridgeTips for maintaining maximum battery life Trickle charge MaintenancechargeInstalling auxiliary plate Bench mounting saw Socket wrenchInstalling or removing saw blade Safety cover Positioning kerf board Dust bagMaintaining maximum cutting capacity Positioningfor adjusting the bevel angle Positioningfor adjusting the miter angleSecuringworkpiece Vertical vise Horizontalvise optionalaccessorySwitch action Holdersand holder assembly optionalaccessoriesPress cutting cutting small workpieces OperationBevel cutting Miter cuttingCompound cutting Fig. C Cutting crown and cover moldings52/38 type 45O type Compound Miter Saw Miter and Bevel Angle SettingsWall to Crown Molding Angle 45 degrees Compound Miter Saw Miter and Bevel Angle SettingsCarryingtool Cutting repetitive lengthsMiter angle Adjusting the cutting angleBevel angle Replacing carbon brushes Recycling the Battery Accessories Part No.192828-1 Cordless Compound Miter SAW Tiex Makita Corporation of America