5.Cutting crown and cover moldings
*Crown and cove moldings can be cut on a compound miter saw with the moldings laid flat on the turn base.
*There are two common types of crown moldings and one type of cove moldings; 52/38" wall angle crown molding, 45" wall angle crown molding and 45" wall angle cove molding. See illustrations below.
Ceiling | Ceiling | Ceiling |
52/38' type | 45" type | 45" type |
crown molding | crown molding | cove molding |
*There are crown and cove molding joints which are made to fit "Inside" 90" corners (0and 0)in Fig. C) and "Outside" 90" corners (0and @ in Fig. C).
- -
Inside corner Outside corner
I
Fig. (C)
Inside corner
Outside corner
20