P 3 / 26
Repair
WARNING: Be sure to unplug the tool before maintenance or repair. See the instruction manual on how to handle the tool.
Remove the following parts from the machine for safety before repair/ maintenance: *Saw Blade *Inner Flange *Outer Flange *Dust Nozzle
[1] Lubrication
1.Apply Makita grease N. No.1 to the following portions designated by black triangle to protect parts and product from unusual abrasion. See Fig. 1.
Item No. | Parts description | Portion to lubricate | |
|
|
| |
16 | Blade case | Apply 6g to the gear room if the room has been washed for cleaning. | |
Both pivot portions where front arm (item No. 145) contacts | |||
|
| ||
|
|
| |
136 | Arm complete | Inside of hole which accepts arm holder's (156) rib portion. | |
Linear ball bearing in which pipe portion of front arm (145) slides | |||
|
| ||
|
|
| |
139 | Stopper plate | Surface to which inner wall of arm holder (156) contacts | |
|
|
| |
145 | Front arm complete | Pivot portion where blade case (16) contacts | |
|
|
| |
153 | O ring 5 | Whole | |
|
|
| |
155 | Pipe | Pipe ends to which axis holes of front arm complete (145) contact | |
|
|
| |
156 | Arm holder | Swivel portion where arm complete (136) contacts | |
|
|
| |
158 | Screw M10 | Threads | |
159, 161 | Flat washer 10 | Surfaces where thrust needle gauge 1024 (160) contacts | |
|
|
| |
160 | Thrust needle gauge 1024 | Head and reverse side to which washers 10 (159 and 161) contact | |
|
|
|
Fig. 1
Linear ball bearing, |
Helical gear 47 |
Stopper pin |