Makita dimensions Assembling laser section exclusively for LS0714FL/ LS0714L, Laser circuit

P 15/ 26

Repair

7.Laser section can be disassembled as shown in Fig. 18-3.

Fig. 18-3

1)Unscrewing pan head screw M3x10 allows to remove torsion spring 9 and laser circuit.

Block C Torsion spring 9

Block B

Pan head screw M3x10

Pan head screw	Laser circuit
M3x10
	Torsion spring 9

2)Remove torsion spring 9 and block C by unscrewing pan head screw M3x10.

[20]Assembling laser section (exclusively for LS0714FL/ LS0714L)

1.Mount torsion spring 9 and block B to block C and secure them with pan head screw M3x10. Refer to Fig. 19-1. Make sure that block C and block B can move in torsional direction.

2.Mount torsion spring 9 and laser circuit to block B, and secure them with pan head screw M3x10. Refer to Fig. 18-3. Make sure that block B and laser circuit can move in torsional direction. See Fig. 19-2.

Fig. 19-1 Fig. 19-2

Block C

Torsion spring 9

Pan head screw M3x10 Block B

Block C	Block B
Torsion spring 9	Laser circuit

3.For easy adjustment of irradiated angle of laser beam from now on, drive hex socket set screws M4x6 until their head portions come to the same level with the surfaces of block C and laser circuit. See Fig. 19-3.

4.Hold the lead wires of laser circuit between two ribs of block C. See Fig. 19-4.

Fig. 19-3

	Block C
Block C	Hex socket
	set screw M4x6
	Hex socket
	set screw M4x6
Hex socket
set screw M4x6	Laser circuit
	Laser circuit

Fig. 19-4

Ribs

Block C

Laser circuit