Makita LS0714FL, LS0714L dimensions

P 5 / 26

Repair

[2] Removing motor unit (blade case, motor housing, handle etc.) from front arm complete

1. Remove safety cover section from blade case as illustrated in Fig. 3-1,Fig.3-2 and Fig.3-3.

Fig. 3-1 Fig. 3-2

Stopper pin Knob 20

Lock the motor unit by pushing knob 20 for stopper pin while keeping the motor unit at the rest position.

Fig. 3-3

Center cover

Hex bolt M6x14

Center cover

Remove hex bolt M6x14 from center cover.

+ Flat head screw M5

Safety cover

Turn safety cover and then open center cover as illustrated above. + flat head screw M5 comes into sight at that time. The safety cover section can be separated from motor unit by removing the + flat head screw M5.

2.Remove the screws in Fig. 3-4to disconnect the linkage of motor unit and front arm complete.

Fig. 3-4

Hex socket headbolt M6x10 (for securing pipe16-90)

Ring 6

Flat washer 6

Link plate

Hex socket head bolt M6x20 (for fixing link plate)