Specifications, English Original instructions

ENGLISH (Original instructions)

SPECIFICATIONS

Model		4351T		4351CT / 4351FCT
Length of stroke			26 mm (1")
	Wood		135 mm (5-5/16")
Cutting capacities	Steel		10 mm (3/8")
	Aluminum		20 mm (25/32")
Strokes per minute		2,800/min.		800 - 2,800/min.
Overall length			271 mm (10-11/16")
Net weight			2.5 kg (5.5 lbs)

•Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

•Specifications may differ from country to country.

•Weight according to EPTA-Procedure 01/2003.

GEA008-1

General Power Tool Safety Warnings

WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool.

Work area safety

1.Keep work area clean and well lit. Cluttered or dark areas invite accidents.

2.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

3.Keep children and bystanders away while

operating a power tool. Distractions can cause you to lose control.

Electrical Safety

4.Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock.

5.Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

6.Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

7.Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock.

8.When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.

9.If operating a power tool in a damp location is unavoidable, use a ground fault circuit interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Personal Safety

10.Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

11.Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.

12.Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. . Carrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents.

13.Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

14.Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

4351CT, 4351T, 4351FCT specifications

The Makita 4351FCT, 4351T, and 4351CT are powerful and efficient tools designed for professional woodworkers and DIY enthusiasts alike. Each model features an array of advanced technologies and robust characteristics that set them apart in the market.

One of the standout features of these jigsaws is the variable speed control that allows users to adjust the speed of the blade between 800 and 2,800 strokes per minute. This flexibility makes it easy to tailor the speed to suit different materials and types of cuts. The saws are equipped with a powerful 720W motor, providing sufficient power for cutting through various materials, including wood, plastic, and metal.

The 4351 series incorporates a patented tool-less blade change system, which simplifies the process of swapping out blades. This feature enhances productivity by allowing users to change blades quickly without the need for additional tools. The saws also support a wide variety of blade types, granting excellent versatility while tackling different projects.

Another remarkable characteristic is the built-in LED light that illuminates the cutting line, ensuring accuracy even in poorly lit work environments. Additionally, the dust blower function keeps the cutting line clear from debris, providing better visibility and cleaner cuts.

In terms of design, the Makita 4351FCT, 4351T, and 4351CT all feature an ergonomic grip that enhances comfort during prolonged use. The saw's rubberized grip reduces vibrations, minimizing fatigue and enabling more precise control. The adjustable base plate allows for bevel cuts of up to 45 degrees, giving users the ability to execute intricate designs effortlessly.

All models in the 4351 series come with a 3-year limited warranty, reflecting Makita's commitment to quality and durability. They are designed to withstand the rigors of daily use, making them a reliable choice for professionals in construction, carpentry, and renovation.

When it comes to performance, the Makita 4351FCT, 4351T, and 4351CT lead the pack with their exceptional cutting speed, precision, and ease of use. Whether you are a seasoned professional or a hobbyist, these jigsaws are perfect for achieving outstanding results in any woodworking project.