Makita 4351FCT, 4351CT, 4351T JIG SAW Safety Warnings, Minimum gage for cord Ampere Rating Volts

Page 3

15.Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

16.If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly

used. Use of dust collection can reduce dust-related hazards.

Power tool use and care

17.Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

18.Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

19.Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

20.Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

21.Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts

and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

22.Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

23.Use the power tool, accessories and tool bits

etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

Service

24.Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

25.Follow instruction for lubricating and changing accessories.

26.Keep handles dry, clean and free from oil and grease.

USE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating. Table 1 shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

Table 1: Minimum gage for cord

Ampere Rating

Volts

 

Total length of cord in feet

 

 

 

120 V

25 ft.

 

50 ft.

100 ft.

 

150 ft.

More Than

Not More Than

 

 

 

AWG

 

 

 

 

 

 

 

 

 

 

 

 

0

6

 

18

 

16

16

 

14

 

 

 

 

 

 

 

 

 

6

10

 

18

 

16

14

 

12

10

12

 

16

 

16

14

 

12

12

16

 

14

 

12

Not Recommended

000173

GEB016-3

JIG SAW SAFETY WARNINGS

1.Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.

2.Use clamps or another practical way to secure and support the workpiece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

3.Always use safety glasses or goggles. Ordinary eye or sun glasses are NOT safety glasses.

4.Avoid cutting nails. Inspect workpiece for any nails and remove them before operation.

5.Do not cut oversize workpiece.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Jig Saw Scie Sauteuse Sierra Caladora English Original instructions SpecificationsJIG SAW Safety Warnings Minimum gage for cord Ampere Rating Volts120 25 ft 50 ft 100 ft 150 ft More Than Not More Than Switch action Functional DescriptionSelecting the cutting action Lighting up the lamps AssemblySpeed adjusting dial Installing or removing saw bladeHex wrench storage Anti-splintering device Cover plateDust extraction Cutouts OperationFront flush cuts Bevel cuttingRip fence set optional accessory Finishing edgesMetal cutting Maintenance AccessoriesWarranty Policy Spécifications Français Mode d’emploi originalQue celles prévues peut entraîner une situation dangereuse Consignes DE Sécurité Pour LA Scie Sauteuse Conservez CE Mode DemploiCadran de rélage de vitesse Description DU FonctionnementInterrupteur Sélection du mouvement de coupeAssemblage Allumage de la lampePose et retrait de la lame de scie Plaque de recouvrement UtilisationRangement de la clé hexagonale Dispositif anti-fentePerçage dun trou de départ Coupes à ras vers lavantCoupe en biseau DécoupageCoupes rectilignes Ensemble de garde parallèle accessoire en optionFinition des bords Coupe du métalAccessoires EntretienPolitique de garantie Especificaciones Español Instrucciones originalesSeguridad eléctrica Servicio de mantenimiento 12 a Advertencias DE Seguridad Para LA Sierra CaladoraGuarde Estas Instrucciones Más de No más de Calibre del cable AWG 10 aControl de ajuste de velocidad Descripción DEL FuncionamientoAccionamiento del interruptor Selección de corteEnsamble Encendido de la lámparaInstalación o extracción del disco de sierra Operación Almacenamiento de la llave de Allen hexagonalDispositivo antiastillado Extracción de polvo Perforando de un agujero de inicio Cortes a ras frontalesCorte en bisel RecortesCortes rectos Acabado de bordesCorte de metales Conjunto de guía de corte al hilo accesorio opcionalMantenimiento AccesoriosPolítica de garantía Advertencia

4351CT, 4351T, 4351FCT specifications

The Makita 4351FCT, 4351T, and 4351CT are powerful and efficient tools designed for professional woodworkers and DIY enthusiasts alike. Each model features an array of advanced technologies and robust characteristics that set them apart in the market.

One of the standout features of these jigsaws is the variable speed control that allows users to adjust the speed of the blade between 800 and 2,800 strokes per minute. This flexibility makes it easy to tailor the speed to suit different materials and types of cuts. The saws are equipped with a powerful 720W motor, providing sufficient power for cutting through various materials, including wood, plastic, and metal.

The 4351 series incorporates a patented tool-less blade change system, which simplifies the process of swapping out blades. This feature enhances productivity by allowing users to change blades quickly without the need for additional tools. The saws also support a wide variety of blade types, granting excellent versatility while tackling different projects.

Another remarkable characteristic is the built-in LED light that illuminates the cutting line, ensuring accuracy even in poorly lit work environments. Additionally, the dust blower function keeps the cutting line clear from debris, providing better visibility and cleaner cuts.

In terms of design, the Makita 4351FCT, 4351T, and 4351CT all feature an ergonomic grip that enhances comfort during prolonged use. The saw's rubberized grip reduces vibrations, minimizing fatigue and enabling more precise control. The adjustable base plate allows for bevel cuts of up to 45 degrees, giving users the ability to execute intricate designs effortlessly.

All models in the 4351 series come with a 3-year limited warranty, reflecting Makita's commitment to quality and durability. They are designed to withstand the rigors of daily use, making them a reliable choice for professionals in construction, carpentry, and renovation.

When it comes to performance, the Makita 4351FCT, 4351T, and 4351CT lead the pack with their exceptional cutting speed, precision, and ease of use. Whether you are a seasoned professional or a hobbyist, these jigsaws are perfect for achieving outstanding results in any woodworking project.
Top Page Image Contents