Makita BHR242 (LXRH01*1) specifications Torsion spring 6 for Connector, Battery housing, See Fig

P 12/ 25

Repair

[3] DISASSEMBLY/ASSEMBLY

[3]-5. Torsion spring 6 for Connector, Battery housing

ASSEMBLING

See Fig. 35.

Set Torsion spring 6 into Housing L, and then assemble Connector to Compression spring 6. Refer to A . Set Opener in place. Refer to B .

When Battery housing L and R are matched, do not fail to assemble the parts shown in C .

Fig. 35

A

C

Cushion rubber (R)

Rubber pin 5

Pin 1.5

Battery housing set

Hold one end of Torsion spring 6

withthe inner wall of Housing L.

Insert the hinge of Connector into the coil of Torsion spring 6.

Hook the opposite end of Torsion spring with the step of Housing L.

B	Opener
Align the chamfered side
of Opener with the walls
of Housing L.

(Housing set)

Cushion rubber (L) Cushion (behind Terminal)