Makita BHR243 (LXRH02*1), BHR242 (LXRH01*1) Slide levers of Dust extraction system DX01, DX02

P 21/ 25

Repair

[3] DISASSEMBLY/ASSEMBLY

[3]-10. Slide levers of Dust extraction system DX01, DX02

DISASSEMBLING

•Slide lever B on Housing L

Remove Rack B and Compression spring 3 in Housing L as drawn in Fig. 67, and then move Slide lever B toward the upper direction like the arrow mark. (Fig. 67)

Fig. 67

Inside of Housing L
Housing L	Slotted screwdriver
Slide lever B
Compression spring 3
Rack B
	Housing L
Outside of Housing L
(viewed from the opposite)
	Arrow mark
	on Slide lever B

•Slide lever A on Slide pipe

Remove Collector base A (DX01)/ B (DX02) from Slide pipe by releasing the hooks with a thin-slotted screwdriver, and then separate Rack A, Compression spring 3, Stopper base and Slide lever A. (Fig. 68)

Fig. 68

Collector base A/ B

1

Slide pipe

Stopper base

3

2

Hooks to set in the holes on sides of Slide pipe

Slide lever A

Compression spring 3 Rack A

Note: Remove Rack A, Compression spring 3 and Slide lever A in the same way as mentioned in Fig. 67.