Makita BHR242 (LXRH01*1), BHR243 (LXRH02*1) 1B. Holder section for BHR243, Disassembling

P 6/ 25

Repair

[3]DISASSEMBLY/ASSEMBLY

[3]-1B. Holder section for BHR243

DISASSEMBLING

(1)Remove Tool holder set from Tool holder guide complete. (Fig. 8)

(2)Remove Cap 35, then separate Ring spring 19 from the groove of Tool holder using 1R003 with 1R212. (Fig. 9)

(3)Remove Chuck cover, then remove Steel ball 7.0 while pressing down Stopper. (Fig. 10)

Stopper, Guide washer, Conical compression spring 21-29 and Flat washer 21 are removed. (Fig. 11)

(4)Remove Ring spring 21 with 1R004 from Tool holder guide complete side. Flat washer 24, Leaf spring and Steel ball 5 are removed. (Fig. 12)

(5)Remove two Steel balls 6, Torsion spring 31 and Change ring from Tool holder. (Fig. 13)

Fig. 8

Tool holder set

Tool holder guide complete

Fig. 9

Cap 35 1R003

1R212

Ring spring 19

Chuck cover Groove of Tool holder

Tool holder set

Fig. 10

Chuck cover

Stopper

Steel ball 7.0

Fig. 11

Stopper Guide washer

Conical compression spring 21-29

Flat washer 21

Tool holder

Fig. 12

Ring spring 21
Flat washer 24
Leaf spring	Tool holder
	guide
	complete
Steel ball 5	side

Tool holder

Fig. 13

Tool holder

Steel ball 6

(2 pcs.)

Torsion spring 31

Change ring

Change cover