Black & Decker LDX112C instruction manual Specific Safety Rules, Service

Page 3

d)Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e)Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f)Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.

g)If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4)Power tool use and care

a)Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b)Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c)Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d)Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e)Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f)Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g)Use the power tool, accessories and tool bits, etc. in accordance with these instructions, taking into account the working conditions and the work to be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5)Battery tool use and care

a) Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.

b)Use power tools only with specifically designated battery packs. Use of any other battery packs may create a risk of injury and fire.

c)When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.

d)Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

6)Service

a)Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

Specific Safety Rules

• Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.

• Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury.

• Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

• When working on a ladder or on scaffolding be sure to lay the tool down on its side when not in use. Some tools with large battery packs will stand upright but may be easily knocked over.

• Use clamps or another practical way to secure and support the work piece to a stable platform. Holding the work by hand or against your body leaves it unstable and may lead to loss of control.

• Keep your hair, clothing, and gloves away from air vents. Air vents often cover moving parts in which these items can be caught.

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents LDX112 Catalog NumberWork Area Safety Safety Guidelines DefinitionsService Specific Safety RulesAlways Wear Certified Safety EQUIPMENT  FUNCTIONAL DESCRIPTION Important Safety Instructions for Battery ChargersTotal Length of Cord Important Safety Instruction for Battery PacksRecommended Minimum Wire Size for Extension Cords Read all InstructionsLeaving the battery in the charger Charging ProcedureBad battery Hot/Cold pack delayInstalling and Removing the Battery Pack From the Tool Safety Warnings and Instructions DrillsKeyless Chuck Figure F Trigger Switch & Reversing Button Figure DOperating Instructions Torque Control Figure EOn board bit storage Make sure switch turns drill on and off Drilling in WoodMaintenance Screw DrivingBattery TroubleshootingProblem Possible Cause Solution To shutoff abruptly when Charge is depleted AccessoriesService Information Full Two-Year Home Use Warranty LDX112 De cataloguePage Page Règles de sécurité spécifiques Symbole d´avertissement Min Tours à la minute SymbolesProtéger le chargeur de la pluie et de la neige Description FonctionnelleDirectives de sécurité importantes pour les blocs- piles Lire toutes les directivesLaisser de piles au LI-ION dans les bagages enregistrés Fonction de suspension du bloc-piles chaud/froid Recommandations en matière de rangementProcédure de charge Pile en mauvais étatInsertion et retrait du bloc-piles de l’outil Avertissement de sécurité et directives perceusesMandrin sans clé figure F Avertissement S’assurer que leDétente ET Bouton Inverseur Réglage du couple figure ePerçage DU Bois Perçage DU MétalPerçage DE LA Maçonnerie Accessoires Dépannage Problème Cause possible Solution possibleMaximiser la durée de vie du Page Catálogo N LDX112 Manual DE Instrucciones DEL TaladroPautas DE SEGURIDAD/DEFINICIONES Page Normas de seguridad específicas Símbolos Descripción DE LAS FuncionesVentilación Blanda Que puedaProcedimiento de carga Recomendaciones con respecto al almacenamientoDejar la batería en el cargador Diagnóstico del cargadorBatería en mal estado Retraso por paquete caliente/fríoPage Interruptor Disparador Y Botón D E Inversión FIG URA D Ajuste del control de torsión Figura EPortabrocas sin llave Figura F Mantenimiento El sello Rbrc Maximizar la vida útil delSolamente para Propósitos de México Accesorios Page Esta Garantia no Aplica Cuando Años DE GarantiaSolamente Para Propositos DE Mexico
Related manuals
Manual 36 pages 26.02 Kb Manual 40 pages 63.75 Kb

LDX112C, LDX112 specifications

Black & Decker has long been synonymous with quality and reliability in the power tool market, and the LDX112C, LDX112C-2R, and LDX112CR models are no exception. These cordless drills are designed for both DIY enthusiasts and professionals, providing exceptional performance and versatility for a variety of tasks.

One of the standout features of these models is their 20V Lithium-Ion battery, which provides ample power for extended use while maintaining a lightweight design. The battery ensures longer run times and faster charging, allowing users to complete projects without frequent interruptions. The LDX112C-2R and LDX112CR come with two batteries, making it easy to switch out for continuous operation.

The LDX112C and its variants boast a compact and ergonomic design, making them comfortable to hold and easy to maneuver in tight spaces. This design factor greatly reduces user fatigue, especially during prolonged use. Weighing in at just a few pounds, these drills are light enough for overhead work, making them excellent for various applications, whether it's drilling holes in drywall or assembling furniture.

Equipped with an adjustable clutch, the LDX112C series allows users to control the torque settings for specific tasks, preventing overdriving screws or damaging materials. The 11-position clutch provides the versatility that novice and seasoned users alike can appreciate. Additionally, these drills feature a two-speed transmission that allows for variable speeds, providing improved control for different drilling and fastening applications.

Another notable aspect is the integrated LED work light, which illuminates dark work areas, enabling users to work more effectively in low-light conditions. The 3/8-inch keyless chuck ensures that bit changes are quick and hassle-free, allowing for smooth transitions between different attachments without the need for additional tools.

In terms of technology, the LDX112C series leverages advanced lithium-ion technology, which not only enhances battery life but also supports consistent power throughout the charge cycle. This means users can expect reliable performance from start to finish.

In conclusion, the Black & Decker LDX112C, LDX112C-2R, and LDX112CR drills represent an excellent investment for anyone seeking a dependable cordless drilling solution. With their robust features, user-friendly design, and impressive battery life, these tools can tackle a variety of projects with ease, establishing them as essential additions to any toolkit. Whether you're drilling, fastening, or working on home improvement projects, these drills deliver the power and versatility needed to get the job done efficiently.
Top Page Image Contents