Precor P/N 300753-201 rev B manual Connecting Cables P20

32 Assembling and Maintaining RBK 800-Series Recumbent Exercise Bikes

Connecting Cables (P20)

After the console has been seated, separate the individual cables out of the end of the cable assembly and attach them to the appropriate circuit connectors inside the console. Refer to the following diagram and table to identify the cables and connectors.

Figure 17: Cable connections, P20 console

Table 3. P20 internal cable connections

Cable	Connector Type	Circuit Connector
		Location
Data from base unit	Eight-contact modular,
	on flat gray cable
Heart rate sensors	Four-contact strip, keyed
Safety key	Six-contact strip, keyed
(treadmills only)
Auto Stop sensor	Four-contact strip, keyed
(treadmills only)