18 | Operating and Maintaining the P20 Console |
On
Viewing the Odometer Informational Menu
Each piece of equipment provides information about its use, as well as its software version, serial number, usage log, and event log. In most cases, you will only access this information if directed to do so by Precor® Customer Support.
To view the odometer informational menu:
1.Press the following keys in the order presented. Reset (Pause/Reset on tread consoles)
Input Up
Enter
Note: Only two seconds are allowed between keypresses. If a key is not pressed, the console display returns to the Welcome banner.
2.Press Up or Down to navigate the menu.
3.Press GO to select a test.
4.Press Programs once to return to the Odometer menu or twice to return to the Welcome banner.
Odometer
The odometer tracks equipment usage by the number of units traveled. The Odometer Units and Values table provides information on how usage is tracked depending on the equipment type.
The odometer information updates under these conditions:
Every 30 minutes
At the end of a course
When an event occurs
If the course is terminated by turning off the power, then the odometer data for that workout is lost.