ACRCOMM Hardware Setup
The PCI version of the ACRCOMM module (part number SBD12550) does not require an external power source.
Note: In Figure 2, the black square on the jumpers indicates pin 1.
Figure 2 ACRCOMM Module—PCI version
Warning!
The PCI version of the ACRCOMM module is not populated with the following components: F1 through F3, D1 through D3, and PWR2.
If your ACRCOMM module is populated with the above components, you have an ISA version of the ACRCOMM module, which is incompatible with the ACR1505.
Jumpers
Chapter 1 – ACRCOMM – 5 –