20 | Operating and Maintaining the P30 Console |
When the equipment is in the Welcome state:
PRECOR scrolls on the lower text display. SELECT A WORKOUT OR PRESS QUICKSTART TO BEGIN scrolls in the upper text display.
The heart rate signal is the only segment activated.
On the treadmill, the belt is not moving and the lift motor is off.
Note: On
The changes made in System Setting modes become the default settings when the display resets to the Welcome banner.
CAUTION: If you change the Unit of Measure display on the treadmill, check the speed setting to verify that it is correct.
To view the Club Parameters settings:
1.At the Welcome banner, press Pause.
2.Press the following number keys in sequence to enter the password:
5 6 5 1 5 6 5
3.Press OK.
The Set Club Parameters banner appears.
Table 2. Navigational keys for the system setting modes
Key | Function |
▲or ▼ Guides you through the settings menu and selections.
OK | Select a menu selection. |
|
|
BACK | Returns to the previous menu level without saving |
| changes. |
|
|
PAUSE | Exits the System Settings mode and returns to the |
| Welcome banner. |