Xantrex Technology 809-0910 manual Changing settings for a device, To view the Select Device menu

System Configuration

Table 3-2Screen and menu descriptions

Screen or menu	Description
Startup screen	Appears for a few seconds after the system is powered
	on or after the system has been reset.
System screen	Displays status information for the power system. The
	System screen’s appearance varies with the status of the
	inverter/charger (Standby, Inverting, Charging, AC
	Bypass, or Equalize). The System screen always
	features a “Menu” arrow pointing to the Enter button.
Select Device menu	Displays a list of Xanbus-enabled devices in the
	system, including the System Control Panel. The length
	of this menu depends on how many devices are
	installed in the system. This menu also contains the
	clock menu (where you can set the time and date) and
	the system settings menu (where you can change
	system modes).
Device menus	Display status information and changeable settings.
	Changeable settings are identified by the square
	brackets [ ] around values in the right-hand column (see
	Figure 3-5 on page 3–6).

Changing settings for a device

If you need to change a setting for a device on the system, use the buttons on the System Control Panel to perform these three basic steps:

•Starting at the System screen, view the Select Device menu.

•Select the device from the Select Device menu.

•Select and adjust a changeable setting on the device menu.

For more information about configuring devices on the system, see the guide for each device.

Viewing the Select Device menu

The Select Device menu lists every Xanbus-enabled device in the power system.

To view the Select Device menu:

◆On the System screen, press Enter.

3–4 975-0083-01-01