
| System Settings Menu Configuration Items |
|
|
Safe mode | You can also use the red System button to put the System Control Panel |
| and all other |
| and holding the System button for five seconds. For more information, |
| see “Safe mode” on page |
Viewing device information
The Device Info screen shows the serial number and firmware revision for each
To view device information:
1.On the System Settings menu, press the down arrow button to highlight View Device Info.
2.Press Enter.
The Device Info screen appears.
809-0915
1945447
F/W Rev. 2.01.00 BN0002
Figure 4-9 Device Info screen (showing Auto Gen Start info)
3.Press the down arrow button to view information for each Xanbus- enabled device on the system.
4.Press Exit to return to the System Settings menu.