Installation
Installing the System Control Panel
| The System Control Panel is designed to be flush mounted through an |
| opening in a wall and secured with four #6 screws. Use the supplied |
| mounting template to precisely mark the opening and screw hole |
| locations. |
Planning an | The System Control Panel requires no connections other than the network |
installation | cables that plug into the back of the unit. Because you cannot access the |
| network inputs once the unit is mounted, the network cables need to be |
| routed through the wall before securing the System Control Panel. |
Materials and tools required
Choosing a location
CAUTION
Allow at least 2 ¼ inches (57 mm) of space behind the wall to accommodate the depth of the unit and allow room for the network cables to bend.
Refer to the Xanbus System Installation Guide for more information about planning and installing a network that includes the System Control Panel.
You will need these materials and tools to complete the installation:
❐mounting template sticker (supplied)
❐four #6 screws (supplied)
❐Phillips head screwdriver
❐jigsaw or small keyhole saw
❐power drill with 1/8" bit (optional)
❐Xantrex network cables or equivalent
Choose a location that is easily accessible. The System Control Panel should be mounted where it is easily visible, with unobstructed access to the screen and push buttons.
The location should be indoors, dry, and free from corrosive or explosive fumes.