Operation
Types of fault messages
continuecancel 
Figure 5-8 System Control Panel fault message
There are two types of System Control Panel fault messages: automatic and manual. For a list of faults and their associated types, refer to Chapter 6, “Troubleshooting”.
Automatic faults clear themselves automatically if the fault condition goes away.
Manual faults require you to clear them by:
•selecting Clear Faults on the menu of the device that generated the fault (if the fault condition still exists, the fault message will reappear).
•correcting the condition that caused the fault.
Viewing the System Control Panel fault log
The fault log lists the most recent System Control Panel faults, up to a total of 20. On each line, the log shows the fault code, the date the fault occurred, and the time the fault occurred.
To view the fault log:
1.On the System Panel advanced menu, press the down arrow button to highlight Fault log.
2.Press Enter.