Configuring the System
menu
Figure 3-3 System screen of Freedom SW 3000 (example)
Selecting the device from the Select Device menu
Use this procedure to select a device before changing a setting.
To select a device:
1.On the Select Device menu, press the down arrow button to highlight the device you want.
InvChg | InvChg will show if there are no |
| compatible inverter/chargers |
| connected to the SCP. |
Figure 3-4 Select Device menu
2.Press Enter.
The menu for the selected device appears.
Selecting and adjusting the changeable setting
Device menu
Identifying changeable settings
You can view and change device settings from the device menu. The number of settings on the device menu will depend on whether you have selected to view basic or advanced menus. See “Viewing Advanced Menus” on page
A device menu displays a list of status information and changeable settings. Changeable settings are enclosed in square brackets. Values in the
Use this procedure to change any device setting.