Xantrex Technology 809-0910 Startup Behavior, System Modes, Changing system modes, Operating mode

Startup Behavior

Startup Behavior

When powering on the Xanbus system for the first time, the System Control Panel displays a fault message asking you to set the clock before proceeding. For procedures for setting the clock, see “Setting the time” on page 4–7 and “Setting the date” on page 4–8.

System Modes

The system modes described in this section affect the performance and behavior of the System Control Panel and all other Xanbus-enabled devices. You will have to change the system mode when putting your system in storage or when installing a new Xanbus-enabled device.

Changing system modes

System modes are changed using the System Settings menu (see “Using the System Settings Menu” on page 4–9). The four system modes are:

•Operating

•Safe

Please read the section about each system mode to find out which mode is appropriate for different conditions or situations.

Operating mode

Characteristics	The basic state of the System Control Panel is Operating mode. In
	Operating mode, the System Control Panel communicates with other
	Xanbus-enabled devices and displays all the network information it is
	configured to display.

Safe mode

Characteristics	Selecting Safe mode stops the generator (if it is running) and puts the
	System Control Panel (and all Xanbus-enabled devices) into Safe mode.
	While in Safe mode, the System Control Panel remains powered,
	“listening” to and reporting its status to the network. However, the output
	power of all Xanbus-enabled devices is disabled and all inverting,
	charging, and generator starting activity stops.
When to use	Use Safe mode when you are adding or removing devices from the
	network. Authorized service personnel must also put the System Control
	Panel in Safe mode before performing software upgrades and diagnostics.

975-0083-01-01 5–7