Configuration
If you make an error, press Exit to move back to the value you need to reset. If you decide to abandon resetting the time, press Exit repeatedly until you return to the Clock menu.
Setting the date
You can set the reference date for the Xanbus system from the Clock menu.
To set the date:
1.On the Clock menu, use the up arrow or down arrow button to highlight Set Date.
2.Press Enter to highlight the month.
3.Use the up arrow or down arrow button to change the month.
4.When the correct month is shown, press Enter to select it and highlight the day.
5.Use the up arrow or down arrow button to change the day.
6.When the correct day is shown, press Enter to select it and highlight the year.
7.Use the up arrow or down arrow button to change the year.
8.When the correct year is shown, press Enter to select it and return to the Clock menu.
If you make an error, press Exit to move back to the value you need to reset. If you decide to abandon resetting the date, press Exit repeatedly until you return to the Clock menu.